Deskset Operation; Deskset Basic Operation; Line Indicators; Make A Call - AT&T SynJ SB67148 User Manual

Deskset operation

Deskset basic operation

The telephone comes programmed to use line 1 (default primary line) for
outgoing calls when you do not press a line key. (To change the primary
line, see Line selection on page 16.) When you answer a call, the telephone
automatically selects the ringing line.

Line indicators

Each of the four indicators on LINE 1-LINE 4 indicates the status of the
corresponding telephone line.
• On when the corresponding line is in use.
• Flashes slowly when the line is on hold.
• Flashes slowly when there is a transferred call on
the corresponding line.
• Flashes slowly when there is an incoming auto
attendant transferred call on the corresponding line.
• Flashes rapidly when there is an incoming call on the corresponding line.

Make a call

To make a call using the corded handset:
1. Lift the corded handset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, and then lift the corded handset.
2. Wait for a dial tone, then enter the telephone number.
The screen displays the elapsed time as you talk (in
hours, minutes and seconds).
To make a call using the speakerphone:
1. Press SPEAKER on the deskset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired line.
2. Wait for a dial tone, then enter the telephone number. The screen displays
the elapsed time as you talk (in hours, minutes and seconds).
To make a call using the corded headset:
Make sure a corded headset is connected to the deskset (page 12).
1. Press HEADSET on the deskset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, and then press HEADSET.
2. Wait for a dial tone, then dial the number. The screen displays the elapsed
time as you talk (in hours, minutes and seconds).
19
Elapsed time
L1
Line1 00:00:30
8888832445
Option