Push To Talk (Ptt) Intercom; Ptt To The Main Telephone Base Or A System Device - AT&T SynJ SB67148 User Manual

Deskset operation

Push to talk (PTT) intercom

You can directly broadcast your voice to the speakerphone of any extension.
The extension you called can respond by pressing the PTT key to begin a
two-way communication. Up to five pairs of PTT calls can exist at a time.

PTT to the main telephone base or a system device

1. When the deskset is not in use, press the
PTT key.
2. Press DIR or
device.
3. Press and hold PTT until the deskset shows
PTT to: X:Handset X Release PTT key to stop
(X represents the extension number [1-0];
Handset X represents the handset name) or
PTT to: :Base Release PTT key to stop. When the
*
connection is made, both the caller and the destination
party hear two beeps.
4. Speak towards the deskset speakerphone while
continuing to hold down the PTT key. Your voice is
broadcast to the desired extension.
Release the PTT key after speaking. There is a three-
5.
second PTT wait state with -MUTE slowly flashing on the
screen. During the PTT wait state, if necessary, you can
press and hold the PTT key to continue speaking towards
the speakerphone.
6. The destination party can respond by converting
the PTT call to an intercom call (see page 37).
NOTE: When the destination device is on an intercom or outside call, you hear a busy tone
and the deskset displays Busy.
CID to choose the desired
35
L1
*: Base
1: Handset 1
2: Handset 2
3: Handset 3
Back Select
L1
PTT to:
*:Base
Release PTT key
to stop
L1
PTT to:
*:Base
-MUTE