Fujitsu Siemens Computers LifeBook S6010 User Manual

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

Table of Contents

Quick Links

Download this manual

Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However, as

ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the

accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.

LifeBook is a trademark of Fujitsu Limited.

Microsoft, Windows, MS, MS-DOS, and Windows NT are registered trademarks of the Microsoft Corporation of the

United States in the United States and other countries.

Intel is a registered trademark of the Intel Corporation of the United States.

Macrovision :-

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents

and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this

other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093

licensed for limited viewing uses only.

Dolby :-

Manufactured under license from Dolby Laboratories. "DOLBY", "PRO LOGIC" and the double-D symbol are

Phoenix is a registered trademark of Phoenix Technologies Corporation of the United States.

K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation.

Other product names are trademarks or registered trademarks of their respective companies.

Other products are copyrighted by their companies.

All other products are trademarks or registered trademarks of their respective companies.

Explanations of the adjustments for the track pad cursor control are taken in part from the ALPS GlidePoint Driver

translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmitted

in any electronic form without the written consent of Fujitsu Limited.

Operations are subject to the following two conditions:

(1) This device may not be allowed to cause harmful interference, (2) This device must accept any interference

received, including interference that may cause undesired operation.

Wesbite: www.fujitsu-pc-asia.com

Table of Contents

Need help?

Do you have a question about the LifeBook S6010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fujitsu Siemens Computers LifeBook S6010

Page 1 Copyright Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. LifeBook is a trademark of Fujitsu Limited.
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.
Page 3 High Safety Required Use This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use and ordinary industrial use, but is not designed,developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury,severe physical damage or other loss (hereinafter ‘High Safety Required Use’), including without limitation, nuclear power reactioncore control in nuclear atomic facility, airplane automatic aircraft...
Page 4 Data Storage Media and Customer Responsibilities The only effective protection for the data stored in a computer, such as on a hard disk, is for you, Purchaser to regularly back up the data. Fujitsu and its affiliates, suppliers, service providers and resellers shall not be responsible for any software programs, data or other information stored or used on any media or part of any Product returned to Fujitsu or its service providers for Warranty Service or other repair, including but not limited to the costs of recovering such programs, data or...
Page 5 AUSTRALIAN WARNINGS WARNING FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED. Connection of Non Certified/Approved peripherals may result in the equipment operating outside the Australian EMI Standards. Modems connected to the Australian telecommunications network must be operated in accordance with the Labelling Notice.
Page 6 NEW ZEALAND WARNINGS The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
Page 7 Note: Modem setting in Windows 98 / Windows Me The default modem setting in Windows 98 / Windows Me operating system is United States of America. If you are residing in Australia or New Zealand, please choose the appropriate country where you are located.
Page 8 Note: Modem setting in Windows XP A. If you are located in Australia 1. Click Start select Control panel select “Phone and Modem Options”. 2. Double click New Location. 3. Choose “Australia” in Country/region pull down menu bar. 4. Select Phone system as “Tone Dialing”. 5.
Page 9 NOTATION IN THIS DOCUMENT Warnings This manual uses a variety of icons as visual marks so that you can use this computer safely and correctly and avoid damage and danger to yourself and to others. These icons and their meanings are as follows. Please learn these icons before reading this manual. Learning these icons will be useful for understanding this manual.
Page 10 Notation in text Here is what symbols in text mean. Symbol Meaning Critical Point Indicates a point necessary for correctly operating the Critical Points hardware or software. Column Gives the meaning and brief explanation of a term. Column → Indicates the page to see elsewhere in this manual. Command input (key input) Within the text of this manual, command input (giving commands to the computer by pressing keys) is indicated as follows.
Page 11 Configuration of this Manual SECTION 1 This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, flat point operation methods, floppy disk unit handing, and battery operation. SECTION 2 This section explains installation of options for this computer.
Page 12: Table Of Contents
CONTENTS SECTION 1 1 Names of the Parts and their Functions ......2 Front features of the computer ............2 Left/right features of the computer ........... 5 Rear features of the computer ............8 Bottom features of the computer ............9 Status indicator LCD ..............
Page 13 Sharing ................... 61 Checking the Connection ............... 63 Connecting Windows XP Systems ........64 Workflow ..................64 Setting Parameters ................. 64 Network Connection ............... 65 Sharing ................... 67 Checking the Connection ............... 69 Troubleshooting ............... 70 If a Second LAN Device is Installed ........ 76 About IP Addresses ............
Page 14 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 1 1 1 1 1 1 1 1 1 1 This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, Flat point operation methods, floppy disk unit handing, and battery operation.
Page 15: Names Of The Parts And Their Functions
SECTION 1 1 Names of the Parts and their Functions Front features of the computer LCD display The monitor of your computer. Critical Points About the characteristics of LCD displays For reasons of characteristics specific to LCD displays, the following phenomena may occur but they are not defects in your LCD display.
Page 16 Critical Points The microphone may cause a howling noise when you are using, for example, a karaoke software program for which the microphone needs to be used along with the internal speakers. If howling occurs, adjust the volume on your computer or use commercially available headphones or an external microphone.
Page 17 ❑ Top of the PC Main Unit Built-in wireless LAN antenna (for models with a wireless LAN module) Your PC came with a built-in LAN antenna. Note: Wireless LAN ugradeability is only applicable to selected countries. Please contact your local sales representative for more information.
Page 18: Left/Right Features Of The Computer
Left/right features of the computer Left panel of the computer Mobile multi-bay Your computer came with a Combo Drive (DVD & CD-RW) or CD-RW drive built into this bay. Depends which model you have. Critical Points To avoid damage to your computer, do not use the computer when the mobile multi-bay is vacant.
Page 19 Right panel of the computer 2 3 4 CAUTION HEARING LOSS • Before connecting a cable to the headphone jack, LINE IN jack, or microphone jack, lower the volume on the computer to a minimum by pressing the [F8] key while holding down the [Fn] key.
Page 20 Headphone jack Used to connect commercially available headphones (with a f3.5-mm mini plug). Headphones with some types of plugs cannot be connected. So before purchasing headphones, make sure they are compatible with your computer. CAUTION HEARING LOSS • Don’t raise the volume too high especially when you are listening with headphones. Listening to very loud sound for a long time could impair your hearing.
Page 21: Rear Features Of The Computer
Rear features of the computer Infrared Port The fast IrDA compatible port allows you to communicate with another IrDA compatible infrared device without a cable. Air Vents Used to discharge heat out of the computer. The cooling fan automatically starts rotating when the temperature in the computer rises to a specific level.
Page 22: Bottom Features Of The Computer
IMPORTANT • When you connect peripheral devices to each corresponding connector, confirm the correct direction of the connector and insert directly into the connector. Bottom features of the computer Port Replicator Connector This connector allows you to connect the Port Replicator to your notebook. Expansion RAM (Random Access Memory) module slot The memory module on your computer is installed here.
Page 23: Status Indicator Lcd
Status indicator LCD Critical Points No indicator is displayed on the status indicator LCD when the main switch is turned off, except when the computer is being recharged. SUS/RES Indicator ( This indicator comes on when the computer is running and blinks in standby status. AC Adapter Indicator ( This indicator comes on when the power is supplied from the AC adapter.
Page 24 Critical Points If you turn off the main switch or operate the SUS/RES switch while the hard disk access indicator is showing, the data on the hard disk may be corrupted. Floppy Access Indicator ( The Floppy Drive Access indicator states whether the floppy disk drive is being accessed. This indicator will flash if your software tries to access a disk.
Page 25: Pointing Device
SECTION 1 2 Pointing Device About the Flat Point The Flat Point is a handy pointing device that enables you to move the mouse pointer freely with your finger. It consists of a touch-pad, left and right buttons on this side of the touch-pad, and the scroll button between the left and right buttons.
Page 26: How To Use The Flat Point
How to use the Flat Point • Click “Click” means quickly pressing the left button once or tapping the touch-pad once. Pressing the right button once is called “right-click.” • Double-click “Double-click” means pressing the left button twice in a row or tapping the touch-pad twice in a row.
Page 27 Critical Points You can change the functions assigned to the right and left buttons and also adjust the mouse speed, using the Mouse Properties dialog box. To display this dialog box, click the Printers and other hardware icon in the Control Panel window and select Mouse. When tapping the touch-pad, tap it quickly with the tip of a finger but not strongly.
Page 28: Keyboard
SECTION 1 3 Keyboard Keyboard Names and functions of the principal keys Keys that can be used as ten-keys Insert Delete Pause Num Lk Scr Lk Prt Sc SysRq Break > < ^ & * Esc (Escape) key Used to cancel the current task and return to the previous task. Function keys Functions assigned to these keys vary from application to application.
Page 29 Delete key Used to delete the character on the right of the cursor. With this key, you can also delete the file or icon you selected. By pressing the [ ] key while holding the [ ] and [ ] keys down, you can forcibly terminate the out-of-control application or computer.
Page 30 FUNCTION KEYS Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. The [FN] key provides extended functions for the notebook and is always used in conjunction with another key. •...
Page 31 End key/Cursor keys Used to move the cursor to the end of the line on which it is currently placed. To do so, press the ] key while holding the [ ] key down. Pressing the [ ] key while holding the [ ] and ] keys down causes the cursor to move to the end of the text.
Page 32: Replacing The Internal Battery Pack
SECTION 1 4 Replacing the Internal Battery Pack WARNING ELECTRIC SHOCK • Before replacing the battery pack, be sure to turn off the computer and disconnect the AC adapter from it. Also, don’t touch any connector of the computer or battery pack to avoid electric shock or malfunction.
Page 33 Remove the internal battery pack. Put a finger in the indentation opened as a result of sliding the internal battery pack lock, and lift the internal battery pack. Internal battery pack lock Indentation Internal battery pack Install a new battery pack. Insert the new battery pack diagonally into the bay and push it down until it is set in place.
Page 34 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 2 2 2 2 2 2 2 2 2 2 This section explains installation of options for this computer.
Page 35: Options
SECTION 2 1 Options Options You can expand the functions of this computer by connecting various options. FDD unit Numerical keypad USB mouse (USB) External display Printer Mouse PC card Combo drive unit (DVD/CD-R/RW) Memory Battery CD-R/RW drive unit Super disk drive unit (Optional) PC Card Slot unit (Optional)
Page 36: Peripherals
Peripherals Below explanation is necessary for your knowledge before connecting your peripherals. Some setting up works are required for a certain peripherals You cannot use some PC peripherals just by connecting it to a PC. Those peripherals require some setting up work after connection. For example, printers and PC cards require “driver installation”...
Page 37: Using A Pc Card
SECTION 2 2 Using a PC Card Precautions for PC Cards Observe the following points when using PC cards to prevent breakdown. Do not place PC cards in high- Do not subject PC cards to Avoid rubbing PC cards and temperature locations and strong shocks.
Page 38 Caution in using PC cards CAUTION FAILURE • A PC card is composed of parts very sensitive to static electricity, and it may be damaged even by static built up in a human body. Before handling a PC card, always touch a metal object with your hand to discharge static.
Page 39: Installing A Pc Card
Installing a PC card CAUTION INJURY • Do not put your finger into the PC card slot when you install a PC card, or you may be injured. Critical Points It may be required to turn off the power to the computer or to install a device driver when you install a specific PC card.
Page 40: Ejecting A Pc Card
Lock the PC card. Fully pull out the PC card eject/lock button, collapse it backward, and lock the PC card with the fitting. PC card eject/lock button If the PC card is being installed for the first time, install any necessary driver. Some PC cards require the installation of a driver.
Page 41 CAUTION HIGH TEMPERATURE • A PC card may be quite hot right after use. Wait for a while before removing a PC card after Step 3, to avoid burning your fingertips. INJURY • When you remove a PC card, do not insert your finger into the PC card slot to avoid cutting your fingertips.
Page 42 Eject the PC card. Press the PC card eject/lock button to eject the PC card. PC card eject/lock button PC card Install the dummy card. Insert the dummy card into the PC card slot as far as it will go, fully pull out the PC card eject/ lock button, and collapse it backward to lock the dummy card.
Page 43: Using A Cd/Dvd
SECTION 2 3 Using a CD/DVD In this manual, CD-ROMs, music CDs and CD-R/RW discs are collectively referred to as CDs, and DVD-ROMs and DVD-VIDEOs are referred to as DVDs. CAUTION INJURY • When inserting or ejecting a CD or DVD, don’t put any fingers on the disc tray to prevent possible injury to them.
Page 44 When you purchase CD-R/RW discs be sure check whether they meet the data writing and rewriting speeds of your drive. Critical Points Don’t use CDs or DVDs other than round discs (e.g., deformed discs, including star-shaped discs and card-type discs). Data cannot be read/written correctly from/on a deformed disc or a deformed disc could cause the CD/DVD drive to fail.
Page 45: Loading A Disc
Loading a disc IMPORTANT • You should preferably power the computer from the AC adapter when frequently accessing a CD or playing back a DVD-VIDEO. • To set a disc on the disc tray, align the center of the disc with the projection at the center of the tray and push the disc down until it clicks into place.
Page 46 Critical Points If the tray does not come out If you have already shut down Windows, turn your computer back on and press the CD eject button. If the main switch is in the Off position ( ), slide it to the | position to turn on the computer, and then press the CD eject button.
Page 47: Ejecting The Disc
Critical Points If a message appears, asking you what to do “If a disc containing this kind of file is inserted ...,” click “No, ...” and click OK. When you load a multi-session CD, it may take much time for your computer to get ready to start.
Page 48 Pull out the tray gently. Disc tray Critical Points If the tray does not come out If you have already shut down Windows, turn your computer back on and press the CD eject button. If the main switch is in the Off position ( ), slide it to the | position to turn on the computer, and then press the CD eject button.
Page 49 Push the tray gently into the computer. Critical Points If the disc won’t come out: 1. Click the Start button, and select My Computer. 2. Move the mouse pointer onto the CD Drive icon in the My Computer window. 3. Press the right button once on the Flat Point. 4.
Page 50: About Memory
SECTION 2 4 About Memory Installing/removing memory This section explains how to install/remove memory in or from your PC. WARNING ELECTRIC SHOCK • To avoid shock hazards, always turn off your PC and detach the AC adopter from it before installing/removing memory. SWALLOWING •...
Page 51: Installing Memory
Critical Points To check the memory size, open the Information menu of BIOS Setup Utility and select Memory Slot from it. The size of the memory installed on your PC is displayed like this: “64MB SDRAM.” If your PC does not start although memory is installed correctly, the memory can be faulty or defective.
Page 52: Removing Memory
Attach the expanded RAM module slot cover and secure it with screws. Reattach the cover removed in Step 3. Expanded RAM module slot cover IMPORTANT • If memory is not installed properly, the message “Expanded Memory Error” will be displayed in English or nothing will be displayed on the screen when you first turn on your PC after installing the memory.
Page 53 Attach the expanded RAM module slot cover and secure it with screws. Reattach the cover removed in Step 3. Expanded RAM module slot cover Critical Points To replace the memory in the lower slot, follow these steps. 1. Open the tabs on both sides of the lower slot in opposite directions, as shown in the figure below.
Page 54 4. Install a new RAM module in the lower slot. Align the notch in the RAM module with the protrusion in the lower slot, and insert it diagonally into the slot until it clicks into place. Notch in the RAM module Check to see that the memory is fastened securely by the tabs on both sides.
Page 55: Expanding Memory
SECTION 2 5 Expanding Memory Preparing necessary items Memory (Expanded RAM You can additionally install memory. module) Philips screwdriver Used to remove the screw securing the cover. Use a Philips (Size: #1) screwdriver that meets the size of the screw (M2.0). Using a screwdriver of other size may cause damage to the screw head.
Page 56 CAUTION FAILURE • When replacing memory, don’t touch its terminals or ICs but hold its edges. Also, be careful not to touch any components or terminals inside the computer. Touching a terminal with oily fingers could cause poor contact. FAILURE •...
Page 57 Remove the memory. Disengage the two tabs securing the memory on both sides, and pull the memory out of the slot. Memory Install a new RAM module. Align the notch in the RAM module with the protrusion on the connector, diagonally insert the RAM module into the slot, and push it down until it clicks into place.
Page 58 Checking the size of the memory installed IMPORTANT • If memory is not installed correctly, the message “Extended memory error” appears or nothing is displayed on the screen when you turn on the computer. In such a case, turn off the main switch of your computer and reinstall the memory. Turn on the computer.
Page 59: Using A Mobile Multi-Bay Unit
SECTION 2 6 Using a Mobile Multi-bay Unit Cautions in using a mobile multi-bay unit Take the following precautions when using a multi-bay unit to avoid damage to it. • The internal DVD-ROM & CD-R/RW drive (that came with your computer) is very sensitive to vibration and shock as it rotates a disc at a very high speed.
Page 60 If your computer is in Suspend mode, press the SUS/RES button to resume operation. Click the icon (Safely Remove Hardware) in the lower right corner of the screen (notification area where a clock is displayed). Select the device you want to unplug or eject and then click Stop. XXX refers to the name of the mobile multi-bay unit currently in use.
Page 61 Press the SUS/RES button. The computer goes into Suspend mode. Install a new unit. Push in the unit as far as it will go with the connector-mounted face facing forward. Press the SUS/RES button again to resume operation. IMPORTANT • To avoid damage to your computer, always use it with a mobile multi-bay unit installed in the bay.
Page 62: Port Replicator
SECTION 2 7 Port Replicator The port replicator is described here. IMPORTANT • The port replicator can be installed/removed regardless of the condition of the PC. If the FDD unit is connected to the FDD unit connector of the port replicator, however, install/ remove the port replicator after switching the PC power off.
Page 63: Removing The Port Replicator
Removing the Port Replicator This section describes how to remove the port replicator. If any peripheral device is connected to the port replicator, switch the power off. Release the port replicator lock. Release the lock by sliding the port replicator removal lever. Removal lever Remove the port replicator.
Page 64: About The Integrated Wireless Lan (For Selected Model)
SECTION 2 8 About the Integrated Wireless Lan (For selected model) Before Using This Device Thank you for purchasing a Fujitsu LifeBook with an Integrated Wireless LAN. This manual describes the basic operating procedures for the Wireless LAN (referred to as the “device” in this manual) and how to set up a wireless LAN network.
Page 65: Connecting Windows 98/2000 Systems
SECTION 2 ® Connecting Windows 98/2000 Systems This chapter describes how to set the wireless LAN connection for computers running Windows 98 or Windows 2000. Critical Points When you receive your LifeBook, the integrated wireless LAN device and drivers have already been installed.
Page 66 Set the encryption items in accordance with Table 2. • AdHoc Network: Specify the same value for all the computers for which the encryption key is used for connection. • Infrastructure Network: Specify the identical encryption keys to the encryption keys set for the access point.
Page 67 When you finish your entry, click [Apply]. Click [OK]. [PRISM Wireless Settings] closes. You have completed the parameter settings. Critical Points When you are using ADSL (PPPoE) with the infrastructure network to connect to the Internet, you need to change the MTU size set for the computer. To change the MTU size, refer to the manual that comes with the access point.
Page 68: Network Connection: Windows 98
SECTION 2 Network Connection: Windows 98 The section describes how to set the network connection if your computer running Windows 98. Network Settings In this section, you set “TCP/IP Settings,” and complete “Checking Computer Name and Workgroup” required for the network connection. TCP/IP Settings Click [Start] →...
Page 69 Item Description Computer A name to identify the computer on the network. You can specify any name Name for any computer. Use up to 15 single-byte characters. For easiest identification, use the model name or user name. Workgroup The name of the network group. Use up to 15 single-byte characters. •...
Page 70 Sharing Files The following example shows how to set sharing the “Work” folder on the c drive. Double-click [My Computer] → [C: drive] on the desktop. Right-click the “Work” folder, then click [Sharing] from the menu that appears. The [Work Properties] window appears.
Page 71 Item Description Not Shared Disables printer sharing. Shared as Enables printer sharing. Share Name Specifies a share name for the printer to be shared. Comment Enter a description of the printer to be shared. Passwords Specify passwords. If you specify a password, you need to enter it when using the printer.
Page 72: Network Connection: Windows 2000
Item Description State Shows the current condition of connection. The MAC address of the other computer that you are connected to is displayed, when the connection is successfully made. If you are connected to more than one computer, the computer that has the best connectivity is displayed.
Page 73 Set an IP address as indicated in Table 7. Ask your network administrator to check the setting. Item Description For AdHoc Set the IP address and subnet mask: Network Click [Use the following IP address], and enter a value for [IP address] and [Subnet mask].
Page 74: Sharing
Sharing In this section, you set sharing of the drive, folder, and printer. You only need to set this when you are sharing files or a printer with other computers on the network. When you share a drive, folder, or printer, you can use them from any computer on the network. Setting [File and Printer Sharing for Microsoft Networks] Click [Start] →...
Page 75 Sharing Files The following example shows how to set sharing the “ Wor k” folder on the c: drive. On the desktop, double-click [My Computer] → C: drive. Right-click the “ Wor k” folder, then click [Sharing] from the menu. The [Work Properties] window appears.
Page 76: Checking The Connection
Checking the Connection After the network setting is completed, access the shared drive on another computer to check the connectivity of the wireless LAN network. Accessing Another Computer Double-click the [My Network Places] icon on the desktop. [My Network Places] appears. Double-click [Computers near me].
Page 77: Connecting Windows Xp Systems
SECTION 2 Connecting Windows XP Systems This chapter describes how to set up the wireless LAN connection for computers that are running Windows XP. Critical Points When you receive your LifeBook, the integrated wireless LAN device and drivers have already been installed.
Page 78: Network Connection
Critical Points Be sure to specify the encryption keys. If you do not specify the keys, any computer with a wireless LAN card can be connected. This presents a risk that other users may steal or destroy your data. Description Item Enter the network name to which you want to connect.
Page 79 Critical Points If [Wireless Network Connection 2 Properties] is not displayed, click [Start] → [Settings] → [Control Panel], and double-click the [Network Connection] icon. Right click the [Wireless Network Connection], and then click [Properties] from the menu that appears. Perform the following steps. •...
Page 80: Sharing
Item Description Computer A name to identify the computer on the network. You can specify any name Name to each computer. Use up to 15 single-byte characters. For easier identification, use the model name or user name. Workgroup A name of the network group. Use up to 15 single-byte characters. AdHoc Network : Specify the same name to all computers within the same network.
Page 81 Sharing Files The following example shows how to set sharing the “ Wor k” folder on the c: drive. Click [Start] → [My Computer]. Double-click the [Local Disk (c:)] icon. Right click the “ Wor k” folder, and then click [Sharing and Security] from the menu that appears.
Page 82: Checking The Connection
Checking the Connection After the network setting is completed, access the shared drive on another computer to check the connectivity of the wireless LAN network. Accessing Another Computer Click [Start] → [My Computer]. From the left menu in [Other Places], click [My Network Places]. From the left menu in [Network Tasks], click [View workgroup computers].
Page 83: Troubleshooting
SECTION 2 Troubleshooting This chapter contains troubleshooting information, including causes and actions, for problems you may find while using this device. Troubleshooting Table Problem Possible Cause Possible Solution An exclamation mark (!) A failure to recognize the Restart the computer. or cross (x) is attached device.
Page 84 Problem Possible Solution Possible Cause Other computers If the TCP/IP protocol is installed, do the The TCP/IP protocol is are not displayed when following to check the IP address: not installed, or, the IP the [Network Computer] address is not set 1.
Page 85 Problem Possible Solution Possible Cause IP packet isn’t reaching Perform the following steps to run the PING Run the PING command command to check if the IP packet is correctly its destination to check the connection delivered to the destination. To run the PING command, the TCP/IP protocol must be installed.
Page 86 Problem Possible Solution Possible Cause Cannot connect to The following causes are possible. Check There are several each one of them. the network possible causes, as • The network name or encryption key is not listed to the right. right. Refer to the specific •...
Page 87 Problem Possible Solution Possible Cause Windows 2000: I want to remove the driver When removing the driver, make sure that (Windows 2000) the device is attached to the computer. If you try to remove the driver while the device is detached from the computer, the driver is not removed.
Page 88 Problem Possible Solution Possible Cause I want to remove the Windows XP: driver When removing the driver, make sure that (Windows XP) the device is attached to the computer. If you try to remove the driver while the device is detached from the computer, the driver is not removed.
Page 89: If A Second Lan Device Is Installed
SECTION 2 If a Second LAN Device is Installed INSTRUCTIONS FOR DISABLING ANOTHER LAN DEVICE If you have another LAN card on your computer running Windows 98, perform the following steps to disable that LAN card before installing the driver. For Windows 98 Click [Start] →...
Page 90: About Ip Addresses
SECTION 2 About IP Addresses SETTING IP ADDRESSES If you are not sure how to set the IP address, refer to the following procedure. If you have an access point (DHCP server) on the network, set the IP address as follows: Windows 98: [Obtain an IP address automatically] Windows 2000: [Obtain an IP address automatically] Windows XP: [Obtain an IP address automatically]...
Page 91: Specifications
SECTION 2 Specifications Technical Specifications for Integrated Wireless Lan Device Item Description Network Type IEEE 802.11b Transfer Rate 11/5.5/2/1Mbps (auto change) Frequency Range 2,400 - 2,483 MHz Channels One of 13 channels is used Card Type Non-intelligent Class B Security Network name, encryption key Supported Operating Systems Windows 98, Windows 2000, Windows XP...
Page 92: Glossary
SECTION 2 Glossary Glossary of Terms Used in This Document AdHoc A name of a wireless LAN configuration. It is a type of communication using wireless cards only. Another type of communication is called Infrastructure (using a wireless card and an access point). ADSL Asymmetric Digital Subscriber Line Technology for transporting high bit-rate services over ordinary phone lines.
Page 93 Local Area Network A connection of computers within a relatively limited area, such as the same floor, or the same building. MAC Address Media Access Control Address A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards.
Page 94: About The Internal Modem
SECTION 2 9 About the Internal Modem Your computer has a V.90-compliant built-in fax modem. WARNING ELECTRIC SHOCK • Do not insert your fingers into a modular jack, or you may receive an electric shock. CAUTION FAILURE • When using a modular cable, always connect it to a modular connector, otherwise your computer could break down.
Page 95 IMPORTANT If your telephone line connector is rosette type, it must be changed to a modular type. If such a change is necessary, have it done by an authorized person. You can also ask your telephone company to do the work. Rosette type Modular type Connect the modular cable to the modular jack of the telephone line.
Page 96: Using Internal Lan
SECTION 2 10 Using Internal LAN Your computer has a built-in LAN device, so that it can be connected to a 10BASE-T or 100BASE- TX network. Preparing necessary items LAN cables are available in two types: straight type and cross LAN cable type.
Page 97: Connecting A Lan Cable
Connecting a LAN cable WARNING ELECTRIC SHOCK • Before connecting a LAN cable, always turn off your computer and disconnect the AC adapter, or you could get an electric shock. ELECTRIC SHOCK • If it thunders, immediately turn off the computer and disconnect the AC adapter and LAN cable from it.
Page 98 Connect the AC adapter to the computer and turn the power on. Click the Start button and select Control Panel. Click Performance and Maintenance, then Power Option. Click of “System standby” on the Power Schemes tab, and select “Never.” Click of “System suspended”...
Page 99: Connecting A Usb Device
SECTION 2 11 Connecting a USB Device Preparing necessary items USB device Devices that can be connected to USB ports. Here are some typical examples of USB devices. Prepare a USB device that meets your needs. • Digital camera • CCD camera •...
Page 100: Connecting A Usb Device
Connecting a USB device Connect a cable to the USB device you want to use. Plug the other end of the cable in the USB port of your computer. Insert the cable with the USB connector’s -marked surface facing upward. USB port USB port Install the device driver.
Page 101: Lifebook Security/Application Panel
SECTION 2 12 LifeBook Security/Application Panel LifeBook Security / Application Panel (1) Application A Button (2) Application B Button (3) Internet Button (4) E-mail Button Enter Button Sus/Res Button A unique feature of your LifeBook is the Security/Application Panel that allows you to secure your LifeBook from unauthorized use.
Page 102: Passwords
Passwords The user and supervisor password may be set on this LifeBook. A supervisor password is typically the same for all LifeBooks in a working group, office, or company to allow for system management. Individual LifeBooks in a group environment should not use a common password.
Page 103: Operating Your Lifebook Security/Application Panel
Setting User Password 1. Go to the Start menu. 2. Click on Programs. 3. Click on Security Panel Application and Set User Password. 4. Follow the on-screen instructions to set the User password. Critical Points You may change or remove the supervisor or user password by repeating the steps defined above.
Page 104: Precautions
Critical Points Remember the user password you specified on the Security Panel Application. If you forget the password you will not be able to use your computer. The supervisor password can override the user password. Precautions Opening and Closing the Cover Closing the cover automatically places the LifeBook into suspend mode.
Page 105 User: 1. Go to Start Menu, Click on Control Panel. 2. Open Add/Remove Programs Properties in the Control Panel. 3. Select the Security Panel Application in the list, and click Add/Remove. 4. When the Confirm File Deletion box appears, click Yes. Supervisor: 1.
Page 106: Configuring Your Lifebook Application Panel
Configuring your LifeBook Application Panel When you start Windows, the LifeBook Application Panel is automatically activated. As an application launcher, the LifeBook Application Panel is very flexible, giving you a variety of options. To set up the Panel to best suit your needs, we have provided the Application Panel Setup utility that quickly and easily helps you make the most of this valuable feature.
Page 107 The Application Panel Setup utility will appear. There are tabs that correspond to the application buttons on the LifeBook Application Panel. When you receive your notebook, these buttons are configured to launch specific applications. Below is the example of applications associated with each button.
Page 108 The button will now launch the new application. If you want to return to launching your Windows default Internet browser with this button, you need only click on “Default Internet Browser” from the Internet browser box. Be aware that you will erase the settings for the “other application”. If you wish to go back to launching the “other application”...
Page 109: Configure Your E-Mail Account Settings
Configure your E-mail Account Settings Critical Points The E-mail Notification LED is available on select LifeBook notebook models only. To use the E-mail LED notification, you must have access to a POP3 Server with no Security Password Authentication. Contact your service provider to determine if they support POP3 without Security Password Authentication.
Page 110 • If LAN: Click on LAN. Enter the POP3 Server name, your account name and password for that account. Consult your Service provider if you do not know or are unsure of the information requested. • If Dial Up: Click on Dial Up. Choose the Dial up configuration (as previously set in Dial Up Networking) you wish to retrieve mail from.
Page 111 To configure Auto Mail Check This function allow you to specify day and time for checking new mail. Only applicable when the PC stays Standby. To configure Mail Check Interval This function allow you to specify an interval (minutes) for checking for a new mail during you use the computer.
Page 112 To configure Special recipient This function allow you to add a special recipient on the Address List. You have to specify from the Mail Check Interval to check the check box of Periodically check for New Mail from the menu Mail Check Interval. There is an icon like envelop appear on the taskbar.
Page 113 To configure Important Mail (Only applicable for CoolView Panel model) This function allow you to change the icon color on the taskbar to notifies you that an important mail comes. To configure Sound This allow you to change the LifeBook Application icon’s color on the taskbar and beeps each time you receive a new message.
Page 114: Desktop Control Panel
Desktop Control Panel Your LifeBook notebook includes a CD Player control panel. You may use this panel to operate the Disc Player. To use the desktop control panel: 1. Click on Start. 2. Click on All Programs. 3. Click on LifeBook Application Panel. 4.
Page 115 You can change the CD Player design by selecting the setting from the pull down menu from the CD Player options. Grey (High Color) Circle (High Color) Stick (High Color) Basic (16 colors) You can move the CD Player to anywhere on your desktop. Drag it by clicking on the track number display, holding it down, and dragging the control panel.
Page 116: Connecting A Mouse
SECTION 2 13 Connecting a Mouse Connecting a USB mouse Plug the USB mouse cable in the USB port of the computer. Align the connectors by matching their shapes and insert the connector of the mouse straight into the USB port of the computer. USB port USB port Critical Points...
Page 117 Critical Points Even when you disable the Flat Point by pressing the [ ] key while pressing down the ] key, the Flat Point is enabled after restarting or resuming operation of the computer. To disable it, you need to press the [ ] key again while holding the [ ] key down.
Page 118: Printer
SECTION 2 14 Printer This section describes connection of a printer to the parallel connector on the connector box. With a printer, you can print the documents and images that are generated on the PC. Critical Points If the printer is one corresponding to USB connection, the USB connector can also be used for connection.
Page 119 Connect the printer cable and the power cable to the printer. Refer to the printer manual for the details on connection. Some printers may already have their power cables fixed on them. Insert the printer power cable plug to a receptacle and switch the printer power on. Connect the AC adapter to the PC and switch the PC power on.
Page 120: Connecting An External Display
SECTION 2 15 Connecting an External Display Preparing necessary items External display Prepare an external display that supports PC/AT-compatible or DOS/ V computers. Display cable Cables for connection between a computer and an external display. Generally, an external display comes with a separate cable or a cable fixed to the back.
Page 121 Turn off the computer and disconnect the AC adapter from it. Connect the display cable to the external display connector on the rear panel of your computer. A display cable connector has a trapezoidal cross section. Adjust the orientation of the connector, (1) insert the cable connector, and (2) secure the display cable with the screws on both sides of the connector.
Page 122 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 3 3 3 3 3 3 3 3 3 3 This section explains what to do when trouble occurs with this computer and when messages are displayed. Read this section as the necessity arises.
Page 123: When This Happens
SECTION 3 1 When This Happens When you are having trouble with this computer, there is something you think is strange, or there is something you want to do, but do not know how. This section is divided into related items.
Page 124 Checkpoint Cause and Solution Have you been pressing any On this computer, if the power management functions are set of the keys? and no key is pressed for a certain period of time, the CPU stops and the LCD panel backlight goes out. (In this state, pressing any key lights up the backlight again.) If the computer stops too frequently, change the BIOS setup settings.
Page 125 The remaining battery charge indicator does not stop flashing. Checkpoint Cause and Solution Is the battery connected Check that the battery is connected correctly. If it is connected correctly? correctly, there is an abnormality in the battery pack, so replace the battery pack.
Page 126 No sound or minimal sound from speaker Checkpoint Cause and Solution Is the volume control Turn the volume control for the correct volume. If this does not correctly adjusted? change the volume, double click the task bar sound indicator and adjust the volume. Check also whether the sound driver is installed correctly.
Page 127 Data cannot be read from the CD-ROM drive. Checkpoint Cause and Solution Is the CD-ROM correctly set? Set the CD-ROM correctly with its label facing upwards. Is there any dirt, Wipe it from the center outwards with a dry, soft cloth. condensation or water on the CD-ROM? Is the CD-ROM scratched or...
Page 128: Care And Maintenance
SECTION 3 2 Care and Maintenance If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. Caution: Electrical equipment may be hazardous if misused. Operations of this product or similar products, must always be supervised by an adult.
Page 129 Storing your LifeBook Notebook • If storing your notebook for a month or longer, turn your LifeBook notebook off and remove all Lithium Ion batteries. • Store your LifeBook notebook and batteries separately. If you store your notebook with a battery installed, the battery will discharge, and battery life will be reduced.
Page 130: Floppy Disks And Drives
• When travelling with the hard drive removed, wrap the drive in a non-conducting materials (cloth or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put your hard drive through a metal detector. Have your hard drive hand-inspected by security personnel.
Page 131 Caring for your Floppy Disk Drive • To clean, wipe the floppy disk drive clean with a dry soft cloth, or with a soft cloth dampened with water or a solution of neutral detergent. Never use benzene, paint thinner or other volatile material.
Page 132 Caring for your DVD/CD-RW/CD-ROM Drive Your DVD/CD-RW/CD-ROM drive is durable but you must treat it with care. Please pay attention to the following points: • The drive rotates the compact disk at a very high speed. Do not carry it around or subject it to shock or vibration with the power on.
Page 133: Glossary
SECTION 3 3 Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your notebook. Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
Page 134 CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requies very low level power to operate. COMM Port Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk.
Page 135 Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your notebook CPU. Megahertz. MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator.
Page 136 Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels screen. The more pixels per area the clearer your image will appear. POST Power On Self Test.
Page 137 Extended Memory All memory more than the 640KB recognized by MS-DOS as system memory. Federal Communication Commission. Floppy Disk A spinning platter of magnetic data storage media which is highly flexible. Gigabyte. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. Hexadecimal A decimal notation for the value of a 4 bit binary number.
Page 138 Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. PS/2 An IBM series of personal computers which established a number of standards for connecting external devices such as keyboards and monitors. Random Access Memory.
Page 139 SMART Self-Monitoring, Analysis and Reporting Technology (SMART) is an emerging technology that provides near-term failure predictions for hard drives. When SMART is enabled the hard drive monitors predetermined drive attributes that are susceptible to degradation over time. If a failure is likely to occur.
Page 140 VRAM Video Random Access Memory. A memory dedicated to video display data and control. Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Write Protect Prevent alteration of the binary state of all bits in a storage media. Example: all information on a device such as a floppy diskette;...

Fujitsu Siemens Computers LifeBook S6010 User Manual

Names of the Parts and Their Functions

Pointing Device

Keyboard

Replacing the Internal Battery Pack

Options

Using a PC Card

Using a CD/DVD

About Memory

Expanding Memory

Using a Mobile Multi-Bay Unit

Port Replicator

About the Integrated Wireless Lan (for Selected Model)

Connecting Windows 98/2000 Systems

Network Connection: Windows 98

Connecting Windows XP Systems

Troubleshooting

If a Second LAN Device Is Installed

About IP Addresses

Specifications

Glossary

About the Internal Modem

Using Internal LAN

Connecting a USB Device

Lifebook Security/Application Panel

Connecting a Mouse

Printer

Connecting an External Display

When this Happens

Care and Maintenance

Glossary

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fujitsu Siemens Computers LifeBook S6010

Summary of Contents for Fujitsu Siemens Computers LifeBook S6010

Table of Contents