Fujitsu Siemens Computers LifeBook S6010 User Manual page 73

5 Set an IP address as indicated in Table 7. Ask your network administrator to check the
setting.
Item Description
For AdHoc Set the IP address and subnet mask:
Network
Click [Use the following IP address], and enter a value for [IP address] and
[Subnet mask].
Select [Obtain an IP address automatically]:
For
Infrastructure
For the DNS server, select [Obtain DNS server address automatically].
Network
For the IP address, DNS server, and default gateway, follow the network
administrator's instructions, if any.
Table 7: Setting an IP Address
6 Click [OK]. The [Local Area Connection Properties] window appears again.
7 Click [OK]. When a message appears prompting you to restart the computer, click [Yes].
Checking the full computer name and workgroup
Click [Start] → [Settings] → [Control Panel].
1
4 Check [Full computer name] and [Workgroup]. Ask your network administrator and check
the setting.
Item Description
Full A name to identify the computer on the network. You can specify any name
Computer to each computer.
Name For easier identification, use the model name or user name.
Workgroup A name for the network group:
• AdHoc Network : Specify the same name to all computers within the same
network.
• Infrastructure Network : Specify a workgroup name to connect to.
To change the setting, click [Properties], and follow the instructions on the
screen. [System Properties] appears again.
Table 8: Checking computer name and workgroup
5 Click [OK]. When a message appears prompting you to restart the computer, click [Yes].
60