Table of Contents
Advertisement
SECTION 2
4 About Memory
Installing/removing memory
This section explains how to install/remove memory in or from your PC.
WARNING
ELECTRIC SHOCK
• To avoid shock hazards, always turn off your PC and detach the AC adopter from it
before installing/removing memory.
SWALLOWING
•
To avoid danger of suffocation, keep detached small parts, such as covers, caps or
screws, away from babies and children.
If a child has swallowed any of these parts, consult the doctor immediately.
CAUTION
FAILURE
•
When installing or removing memory, catch hold of its edge to avoid touching the
terminal or IC. Be careful not to touch internal parts or terminals to avoid poor contact.
FAILURE
•
Memory is composed of static-sensitive parts and it is broken easily if static electricity
build in a human body is discharged and flows through it. To avoid damage to the
memory, be sure to touch a metal object to discharge static electricity before touching
the memory.
FAILURE
•
Before installing or removing memory, always turn off your PC. Installing or removing
memory with Windows XP/2000/Me/98 on standby or your PC in the Hibernation
mode could result in the loss of data or cause damage to your PC or memory.
IMPORTANT
•
To remove screws from your PC, use a – 1 screwdriver that matches the size of the
screws (M2). The use of a screwdriver of any other size could cause damage to the
head of a screw.
•
Do not install any memory other than Fujitsu tested memory.
37
Advertisement
Table of Contents
