Fujitsu Siemens Computers LifeBook S6010 User Manual page 46

Critical Points
If the tray does not come out
- If you have already shut down Windows, turn your computer back on and press the CD
eject button.
If the main switch is in the Off position (
and then press the CD eject button.
You may press the CD eject button even when the
LCD.
3 Set a disc on the tray while holding the tray.
Align the hole of the disc with the projection at the center of the tray with the labeled surface up,
and push the disc down until it clicks into place. Failure to fit a disc correctly onto the projection
could prevent the disc from being ejected.
Disc tray
4 Push the tray gently into the computer.
It takes about 10 seconds for your computer to get ready to start the loaded disc.
Projection
), slide it to the | position to turn on the computer,
icon is blinking on the status indicator
33