Table of Contents
Advertisement
Connecting a LAN cable
WARNING
ELECTRIC SHOCK
•
Before connecting a LAN cable, always turn off your computer and disconnect the
AC adapter, or you could get an electric shock.
ELECTRIC SHOCK
•
If it thunders, immediately turn off the computer and disconnect the AC adapter and
LAN cable from it. Lightning could cause damage to the computer and cause a fire
in the worst case.
CAUTION
ELECTRIC SHOCK
•
Don't put any finger into the LAN port, or you could get an electric shock.
FAILURE
•
Be sure to plug a LAN cable correctly in the LAN port. Failure to do so could cause
your computer to fail.
1
Turn off your computer and disconnect the AC adapter.
2
Plug a LAN cable in the LAN port on the right panel of the computer.
3
Plug the LAN cable in the network device.
Connect the other end of the LAN cable that you connected in step 2, to the LAN port of the
network device, then turn on the network device.
84
LAN port
Advertisement
Table of Contents
