5
Press the SUS/RES button.
The computer goes into Suspend mode.
6
Install a new unit.
Push in the unit as far as it will go with the connector-mounted face facing forward.
7
Press the SUS/RES button again to resume operation.
IMPORTANT
•
To avoid damage to your computer, always use it with a mobile multi-bay unit installed in
the bay.
•
Raise the mobile multi-bay unit release lever only when removing the mobile multi-bay
unit. If you raise the lever by mistake, the lock may be released. In such a case, turn off
your computer, remove the unit, and reinstall it.
48