Table of Contents
Advertisement
Critical Points
To check the memory size, open the Information menu of BIOS Setup Utility and select
Memory Slot from it. The size of the memory installed on your PC is displayed like this:
"64MB SDRAM." If your PC does not start although memory is installed correctly, the memory
can be faulty or defective. In that case, contact Fujitsu Personal Echo Center or your local
retailer.
To avoid damage to your PC, do not touch any internal parts other than those you need to
touch for the installation or removal of memory.
To avoid damage to your PC, take care not to drop detached screws, and so on into the PC.
To upgrade the memory on your PC, for example to 1 GB, you will need to remove the
existing RAM module or modules.
Installing memory
1
Turn off your PC and disconnect the AC adopter from it.
2
Close the LCD panel and place your computer upside down.
3
Remove two screws and detach the expanded RAM module slot cover.
Detach the expanded RAM module slot cover on the bottom of the PC.
4
Install a new RAM module.
Align the notch in the RAM module with the protrusion in the slot, and insert it diagonally into the
slot until it clicks into place.
Your PC is provided with two expanded RAM module slots: upper slot (DIMM 2) and lower slot
(DIMM 1).
Notch in the
RAM module
Upper slot (DIMM2)
38
Expanded RAM
module slot cover
Lower slot (DIMM1)
Advertisement
Table of Contents
