Table of Contents
Advertisement
Passwords
The user and supervisor password may be set on this LifeBook. A supervisor password is
typically the same for all LifeBooks in a working group, office, or company to allow for system
management. Individual LifeBooks in a group environment should not use a common
password. A password consists of one to five button strokes plus the enter button. A valid
stroke consists of pushing one or up to four buttons simultaneously. The following are valid
button strokes:
• Pushing [4] by itself
• Pushing [2] and [3] at the same time
• Pushing [1], [2], and [4] at the same time
• Pushing [1], [2], [3], and [4] at the same time
The following are valid passwords. The numbers within braces ({ }) are button strokes using more
than one button.
• {[2]+[3]}, [1], [enter]
• [4], [enter]
• {[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]
Setting Passwords
When shipped from the factory, no passwords are set. You have a choice of having no password
or setting a supervisor and user password. You must set the supervisor password before the
user password.
Critical Points
The purpose of supervisor password is to be able to bypass the user password in case the
user password is forgotten. The supervisor password alone will not lock the system.
You have to set both the supervisor and user passwords for the security panel to work.
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor
password can bypass the user password.
1. Go to the Start menu.
2. Click on Run.
3. Type in FJSECS.EXE, then press [Enter]
4. Follow the on-screen instructions to set the Supervisor password.
89
Advertisement
Table of Contents
