Project Management; Saving Data On A Memory Card Or Storage Module; Loading Data From A Memory Card Or The Storage Module - Panasonic AV-HS6000 Operating Manual

Project management

The settings of the unit can be saved or loaded in/from three types of storage.
f Memory card (optional) inserted in the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2
f Storage Module AV-HS60D1 (optional) which can be mounted inside the Main Frame AV-HS60U1/AV-HS60U2
f Internal storage of the local computer connected to the <LAN> terminal of the Main Frame AV-HS60U1/AV-HS60U2 (This function will be available in
V2.00.00 or higher.)
@
NOTE
t To use a memory card in the unit, make sure to initialize the memory card using the unit. When the unit initializes the memory card, it formats the
memory card (in compliance with the SD standard) and creates a dedicated directory. (All files saved on the memory card will be erased.)
For details, refer to "Initializing a memory card" (page 103).

Saving data on a memory card or storage module

Save a project file in a memory card or the Storage Module AV‑HS60D1 (optional).
1
Select the <PRJ> button → [PROJECT] → [SD/SSD] tab.
2
Select an item in [Save] in the [SD]/[SSD] column.
f The [Save] screen is displayed.
3
Change the screen display as necessary.
[Sort]
[View]
[Cancel]
4
Select the item to be stored.
[Setup]*
1
[Preset]*
2
[SMEM]*
1
[EMEM]*
2
[Macro]*
2
[Still]*
2
[Clip]*
2
The setting is fixed with [ON] in the version below V2.00.00.
*1
The setting is fixed with [OFF] in the version below V2.00.00.
*2
5
Select [OK].
f The project file is saved in a free register memory positioned after the selected file.
f A file name is assigned automatically. To change the file name, use the [Misc] screen after the registration.
f A registered register memory cannot be overwritten. Delete the data on the [Misc] screen before registration.

Loading data from a memory card or the storage module

Load a project file saved in a memory card or the Storage Module AV‑HS60D1 (optional).
1
Select the <PRJ> button → [PROJECT] → [SD/SSD] tab.
2
Select an item in [Load] in the [SD]/[SSD] column.
f The [Load] screen is displayed.
3
Change the screen display as necessary.
[Sort]
[View]
[Cancel]
4
Select the item to load.
f Items not saved in the project file are displayed as [Off].
[Setup]*
1
[Preset]*
2
[SMEM]*
1
[EMEM]*
2
[Macro]*
2
[Still]*
2
[Clip]*
2
The setting is fixed with [ON] in the version below V2.00.00.
*1
The setting is fixed with [OFF] in the version below V2.00.00.
*2
Chapter 5 Basic Operations — Project management
Sorts the file icon view in ascending or descending order by file number, file name, or date.
Fixed to icon display.
Closes the [Save] screen.
Current setting data
Memories other than shot memory, event memory, macro memory, and video memory (Still, Clip)
Register memory of shot memory (Max. 81)
Register memory of event memory (Max. 81)
Register memory of macro memory (Max. 81)
Four channels of current frame memory
Four channels of current frame memory
Sorts the file icon view in ascending or descending order by file number, file name, or date.
Fixed to icon display.
Closes the [Load] screen.
Current setting data
Memories other than shot memory, event memory, macro memory, and video memory (Still, Clip)
Register memory of shot memory (Max. 81)
Register memory of event memory (Max. 81)
Register memory of macro memory (Max. 81)
4ch of current frame memory
4ch of current frame memory
– 100 –