Divus TOUCHZONE TZ07 User Manual page 44

DIVUS TOUCHZONE . 44
The following screenshots show the message at first start (on the left side) and the mentioned information
window (on the right side):
The following settings explain the parameters available for the configuration of DIVUS KIBRO:
SETTING
Default URL
App-Autostart
Keep Display On
Enable Fullscreen
Enable Auto-Hide
Password Protection
Return to default URL
Empty Cache
Automatic Memory Control
At completed configuration the settings can be left by using the "Back" button; after a short loading time and
visualisation of a corresponding loading icon DIVUS KIBRO will show the desired web contents.
Note: DIVUS KIBRO doesn't support any plugins or special functions of a browser (like e.g. zoom, scale etc.).
For this reason, only pure HTML contents can be visualised; pages that require special plugins on client side
will not work! The compatibility with any type of web contents corresponds at most to the one of the default
browser of Android 4.2.2.
Further information about the DIVUS KIBRO app can be requested by contacting the technical support of DIVUS.
DESCRIPTION
In this field the URL of the web contents that should be shown must be entered. The app
supports only plain HTML contents that do not require additional plugins. Furthermore the
contents are shown as they are received; no scaling or zoom factors are applied.
If the URL is changed, the app automatically deletes it caches and will renew the connection.
If this option is enabled, the app will be automatically started after a reboot of DIVUS TZ. In
this way, after every boot the connection to the server will be established immediately.
This option defines whether the app should keep the display of DIVUS TZ always on or
instead the energy settings (as defined within the DIVUS LAUNCHER) should be used.
This setting defines whether the status bar of Android on the upper border of the display
should be hidden (= fullscreen mode) or shown. By default, DIVUS KIBRO is started in
fullscreen mode.
This option permits to set a timeout after which the app is closed automatically. This pre-
vents that the app remains permanently in front and hides other applications. If the timeout
is set to „0" or left empty, this function is disabled.
As already mentioned, this point allows defining a password which protects the access to
the settings menu. If this field is left empty, access to the settings is granted to everybody
clicking on the settings button.
Return to default URL This entry refreshes the interface of the software and returns to the
specified default URL.
If this menu entry is clicked, the local cache of DIVUS TZ is emptied / deleted and at the
next connection to the server all necessary data is downloaded again from the server. This
function is necessary whenever changes are made on the server side or if e.g. the URL has
been changed completely. In these cases the cache has to be refreshed before DIVUS TZ
will show the new configurations.
This feature should avoid that the app requires too many resources because of the continu-
ous data transfer. The options are:
• Off
• Scheduled
• Automatic
The first option disables the feature and results in no active memory control. The cache
in this case must either be controlled and cleaned manually by the user or directly by the
server side.
The second option enables another menu entry ("Clear Interval") which permits to set a time
interval, after which the app continuously will delete its own cache storage.
The third option is the intelligent solution, which automatically checks the free resources of
the device and empties the cache only if it reaches a critical value. Furthermore, this mode
also controls the RAM storage and eventually optimizes the RAM load