Divus TOUCHZONE TZ07 User Manual page 36

DIVUS TOUCHZONE . 36
Even the selection popup of the external units can be scrolled vertically and contains further entries (not
shown in the screenshot above). For example the list contains the entry „Manual Config.", which permits the
integration of external units, whose type is not directly defined by an entry in the selection popup. In this
case, beneath the fields already described on the previous page, also the following 4 entries will be shown for
the external unit (see screenshot above):
• DTMF - Accept:
DTMF tone for starting the conversation
• DTMF – dooropener:
DTMF tone to control the door opener, is connected to the KEY-icon in the app
• DTMF - Hangup:
DTMF tone for closing the conversation
• DTMF - auxiliary (optional):
DTMF tone to control the auxiliary relay, is connected to the LIGHT-icon in the app
When selecting another type from the selection popup, above fields are automatically filled in correctly (and
therefore are not shown at all); only in case of the manual configuration they have to be inserted.
The camera configuration was completely redesigned since the last version of the app and is now shown in a
separate popup window (check out screenshot above).
Beneath the known support of camera streams in MJPG format, now it is also possible to configure camera
streams using JPEG and RTSP/H.264 format (the letter still as BETA feature), for both the main camera as also
for the optional secondary camera.
Meanwhile the second camera offers only those 3 configuration options (MJPG, JPEG and RTSP/H.264),
the main camera continues to offer the possibility to use the camera signal of the selected external unit.
Therefore, an additional option called "Use camera of selected intercom type" is available.
If selected, only the IP address of the camera of the external unit must be entered (without any prefix or
paths), meanwhile for all other options the whole path to the camera signal must be entered. In order to give
an idea, for each type an example is shown directly within the configuration popup; in this way, you just need
to adapt the shown example path to the one matching your camera.
The following screenshot shows the available options for the camera type of the main camera:
Note: If the manual configuration was selected as intercom type, the option „Use camera of selected
intercom type" will not be shown, since with manual configuration there is no information about the used
camera. In this case the camera must be configured using one of the other 3 options.