Divus TOUCHZONE TZ07 User Manual page 38

DIVUS TOUCHZONE . 38
• KNXCONTROL IP Address:
Please insert the IP address of the KNXCONTROL device that should be used in order to send out the
command.
• Object ID:
As already mentioned for the native lock screen template, the ID of the object that should be controlled
must be localized using the search function of the OPTIMA interface and them must be entered here.
• Duration of door opener signal:
Since the door opener signal is realized as an ON/OFF sequence, you can specify the length (in
milliseconds) of the ON signal.
If all parameters have been configured correctly, the corresponding KNX command can be activated at any
time through the door opener button shown in the graphical interface. Naturally it is possible to connect the
main and the auxiliary door opener button to different object ID and even to different KNXCONTROL devices, if
required!
Selection „Control Digital Output (works only on DIVUS TOUCHZONE)":
If the last option is selected, the door opener buttons can be used in order to control the digital outputs of
DIVUS TZ. It is obvious that this functionality can be used only in combination with DIVUS TZ and therefore is
not available if the app is used on other smart devices.
Also for this functionality the setting "Duration of door opener signal" is available, since also for the digital
output you can define how long (always in milliseconds) the output should remain active. Furthermore, this
selection offers a sub-menu for the configuration of the digital outputs, but also for the configuration of the
digital inputs of DIVUS TZ. The following screenshot shows the mentioned sub-menu:
The section „Digital Inputs" is not directly related to the door opener signal, but it offers the possibility to open
the app and start ringing in dependency of the status of the digital inputs. Therefore for example there is the
possibility to realize an additional doorbell using a traditional push button; clearly this will not allow any kind of
communication, but it can be used for signaling purposes. For each of the 4 available digital inputs one of the
following options can be selected:
Doorbell: (Show app & start ringing)
If this option is selected, the app will be shown with a minimum interface (only the door call can be
confirmed) and start ringing whenever the connected input is triggered.
Advanced Doorbell: (Show app & start ringing)
If this option is selected, the app will be shown with a minimum interface (only the door call can be
confirmed) and start ringing whenever the connected input is triggered. Furthermore a freely configurable
video signal can be shown. The video signal can be set up in the same way as for the external interfaces,
using the new camera configuration popup window.
The section „Digital Outputs" among others handles the door opener function. As already seen before with