Divus TOUCHZONE TZ07 User Manual page 40

DIVUS TOUCHZONE . 40
The menu entry "App Autostart" permits to define whether the app should be started automatically at completed
boot of the DIVUS TZ or not. If the app should be able to react on incoming calls, this option must be enabled.
The menu entry „Enable auto-hide" permits to set a timeout after which the app is closed automatically.
This prevents that the app remains permanently in front and hides other applications (for example when an
incoming call is not answered). If the timeout is set to „0" or left empty, this function is disabled.
The option "Keep Display On" defines whether the app should keep the display of DIVUS TZ always on or
instead the energy settings of the device (as defined within the DIVUS LAUNCHER) should be used.
The option "Select ringtone" permits to select the default ringtone among the different ringtones present in
the Android system. This ringtone is used whenever no custom ringtone has been assigned to the external /
internal unit. Android supports also adding custom ringtones; in order to accomplish this task, please refer to
the documentation of Android or use one of the tutorials present in the World Wide Web.
The "Do not disturb" mode can be seen as an extended mute mode: while the app – if only muted – still
is opened automatically in front of incoming calls and for example wakes the device from sleep / standby
mode, the "Do not disturb" mode blocks this. Incoming calls are completely ignored and will not be registered;
outgoing calls can still be done normally.
This option can either be enabled through the option menu or also by long-clicking the SPEAKER button
directly in the graphical interface of the app.
The following screenshots show 2 of the options explained above: on the left side the selection popup of the
ringtones, on the right side the GUI of the app with active "Do not disturb" mode:
The point „Password protection" is already known from the previous 2 apps and permits to define a password
which protects the access to the settings menu. If this field is left empty, the access to the settings is
unprotected.