Divus TOUCHZONE TZ07 User Manual page 41

Note: please always leave the settings using the BACK key, otherwise the app won't take over the new
settings and eventually will not work. The app in this case will also show a warning message with the
necessary actions to be taken.
The following screenshot shows the app in use. On the right side of the screenshot you can find some
explanations regarding the elements of the interface:
1
BUTTON
Key
Light
Camera
Volume +/-
Speaker
Phone Green
Phone Red
1. Video area, in this window the video signal of the external unit / the door spy will be shown.If 2 video
signals have been configured, it is possible to switch between them using a horizontal swipe gesture.
2. Status bar, informs about the registration state on the VoIP server and about incoming calls
3. DIVUS logo, gives access to the settings menu
4. Action area with different buttons, please check out the table below for functionality description.
3
DESCRIPTION
Button to send the configured main door opener action (DTMF tone, KNX signal or digital output)
Button to send the configured auxiliary door opener action (DTMF tone, KNX signal or digital output)
Toggle button to show / hide the camera signal / door spy camera
Buttons to control the volume
Toggle button (between + and -) to mute / unmute microphone/ speaker and to enable /
disable the "Do not disturb" mode (using a long click)
Button to accept calls / start new calls
Button to decline / terminate calls
2
4