Divus TOUCHZONE TZ07 User Manual page 29

• Switch Label
Here you can specify a short description which will be shown below the switch.
• Brightness Effect
If this effect is enabled, the switching function will not only result in the corresponding KNX action, but
also the display of DIVUS TZ will be dimmed accordingly (switch OFF = display on minimum brightness,
switch ON = display on maximum brightness).
After the configuration of the single options the lock screen can be used. Compared to the web template, the
native template has no loading times and is immediately available. On the other side, the native template only
offers one KNX function, meanwhile the web template can contain up to 8 KNX functions.
Note: If at the first start of the native template instead of the desired switch only an empty wall is visualised,
this either means that the is no connection to the specified KNXCONTROL device or KNX bus, or that the
configured KNX object hasn't been configured to obtain feedback (status) messages from the bus and
works in write-only mode. In this case, the switch will only be shown if you click once on the empty wall.
In order to see also the correct state of the object, the KNX object must be configured correctly within the
OPTIMA interface. Information on the configuration can be found inside the installation manual of the OPTIMA
interface.
The next section deals with the system settings of DIVUS TZ.
Category „Advanced":
The following screenshot shows the different settings / entries available in the last category:
The entry "Password Protection" can be used to protect the current settings page; when clicking on the
DIVUS logo within the launcher, a password dialog will be shown and the settings page will only be accessible
when the correct password is inserted. At delivery, this password is set to 0000 and – as mentioned in the
welcome screen – must be changed. If this field is left empty, the access to the settings will be unprotected.
The option "App Autostart" permits to select one of the installed apps, which will be automatically started by
the DIVUS LAUNCHER once DIVUS TZ has completed the boot. This allows showing a specific app whenever the
device makes a reboot. A click on the HOME button or HOME key will always lead back to the DIVUS LAUNCHER;
the selected app therefore doesn't substitute the launcher. In the latest version it is also possible to connect a URL
instead of an app, which after completed startup will be shown within the specified default browser. The functionality
/ configuration hereby is the same as already explained earlier in this manual for the new URL functionality.