Divus TOUCHZONE TZ07 User Manual page 28

DIVUS TOUCHZONE . 28
The configuration of the native template is very similar to the one of the web template, but it offers a
dedicated sub-menu for the configuration of the template design. The following screenshots show an active
native template (left) and the available options for its configuration (right):
As also for the web template image lock screen, the gesture control remains valid, same as the timeout
and password protection settings. Contrary to the web template, the native template doesn't require any
login data (since the contents are not received through the OPTIMA interface), but only the IP address of the
connected KNXCONTROL device and the ID of the object that should be controlled. This means that the native
template doesn't use a room ID (as the web template), but the ID of a single KNX object. This ID can be found
in the same way as the room ID (as described on the last page), by using the search function of the OPTIMA
interface.
Furthermore, the native template offers the following sub-menu for the configuration of the lock screen
template design:
Through the settings present in this menu, the style and design of the template can be defined. The following
options are available:
• Wall Design
Select one of the different designs, which will then be shown as background (and therefore as wall)
picture of your switch.
• Switch Design
Select the desired switch design. You can choose between 3 bright and 3 dark variants.
• Switch Icon
Through this option you can define whether to show a functional icon on the switch (like e.g. light, audio,
irrigation) or not.