Divus TOUCHZONE TZ07 User Manual page 27

The native template instead offers a completely independent graphical interface, which is highly customizable
and communicates directly with the KNXCONTROL device, without the use of HTML contents. This eliminates
the loading times for the template and permits to use alternative designs.
The following screenshots show an active web template lock screen (on the left side) and the available
settings for its configuration (on the right side), explained below:
• Lock Screen Timeout:
Defines the time, after which the lock screen should be shown. Please take care that the first access to
the lock screen after changing the template settings always will be take around 40 seconds; the defined
value will then be used for any further start of the lock screen.
• Lock Screen IP Address:
Defines the IP address of the KNXCONTROL device, which provides the lock screen template
• Lock Screen ID:
Defines the ID number of the room that is used as lock screen template. This number can be identified
through the search function within the configuration area of OPTIMA. Just search for the desired room;
in the list with the search results the ID number is shown right under the name of the room, as shown in
the following screenshot:
• Lock Screen Buttons:
Through this pop-up menu you can define how many buttons the used lock screen template should
show. You can select between 1, 2, 4, 6 or 8 buttons. Please take care that the previously (through the ID
number) selected room contains at least the selected amount of KNX objects; otherwise the lock screen
template will show empty buttons.
• Lock Screen Username:
Please specify the user name required for the login on OPTIMA. NOTE: for a better overview it is
recommended to create a separate user in OPTIMA for the lock screen template.
• Lock Screen Password:
Please insert the password corresponding to the user inserted before
If all parameters have been configured correctly, at the next launch of the lock screen the desired buttons
should be shown and a direct control of the system should be possible. Naturally, the previously explained lock
screen gestures will remain active also when using the template option.
Note: Depending on the server configuration it can be possible that the login credentials at the first access have
also to be inserted manually. Furthermore, in front of graphical changes to the visualisation (like e.g. a THEME
switch) it will be necessary to reboot DIVUS TZ through the power off menu in order to take over all the changes.