Divus TOUCHZONE TZ07 User Manual page 34

DIVUS TOUCHZONE . 34
The following screenshots show the welcome message at first start as well as the configuration menu that is
opened automatically when confirming the welcome message through the „OK" button:
since the last version, the settings of the app have been grouped into categories (just like for the launcher
app), in order to provide a better structure and overview. The following pages show how to correctly configure
the Videophone app.
In order to use at least the minimal functionality of the app, the settings regarding the VoIP registration (the
first category called „VoIP Settings") have to be configured correctly. In the connection it will already be
possible to reach other members of the VoIP server / to receive calls from other members.
SETTING DESCRIPTION
In this field the IP address of the targeted VoIP server must be entered.
Enter VoIP Server IP Take care: if you change this value, please restart your DIVUS TZ in order to guarantee a
correct registration!
The username that has to be inserted in this field previously needs to be created on VoIP
server side. If a system delivered by DIVUS is used, generally the users from 101 to 120 are
already preconfigured and one of them can be used for this field (take care when assigning
Enter VoIP Username the usernames; each username can be used by only one device at the same time). If a KNX-
CONTROL device is used as VoIP server, you will have to create an internal unit for DIVUS TZ
in the corresponding configuration menu on the server. More information regarding this topic
can be found in the manual of the server.
The VoIP password, when using a system preconfigured and delivered by DIVUS, is always
Enter VoIP password identical to the username. If you are using your own configuration, please insert the pass-
word that you have set during the creation of the corresponding user on the VoIP server.
Defines the VoIP port, through which the VoIP server accepts registrations (normally AL-
Enter VoIP port
WAYS „5060", please change only in special cases).
If this option is enabled, an additional field named „Registration timeout" will be shown,
which allows the input of a time period in minutes. After this timeout the registration on
the VoIP server will be force-closed and renewed. TAKE CARE: this option is not required
Enable re-registration in combination with VoIP servers delivered by DIVUS and is therefore disabled by default.
Only when using certain third party systems (please check out also the note below) this set-
ting can be required in order to get correct functionality, like e.g. in combination with AVM
FRITZ!Box.
Note: The app DIVUS VIDEOPHONE was designed for the use in combination with DIVUS systems. Since
the app is based completely on the SIP standard, it will also be possible to use it with arbitrary VoIP servers.
Nevertheless, DIVUS points out that the support for the app will only be granted when the Videophone app is
used in combination with a system either from DIVUS or at least defined as compatible by DIVUS.
Note: if the app after a modification of those 5 parameters doesn't register correctly on the VoIP server,
please reboot your DIVUS TZ.
As already mentioned, those 5 settings are enough to register on the VoIP server and therefore to make calls
between DIVUS TZ and other VoIP members. If also external units should be handled and the video signals
of cameras should be displayed, also the following settings have to be configured correctly. The category
"Configuration of the external and internal units" offers different possibilities:
The menu entry „Phonebook" opens a sub menu that permits to configure up to 10 external units and 20
internal units. On top of the sub menu a drop down menu permits to switch between external and internal
units; furthermore, a help button that informs about the parameters to be set in this page and a back button
(that also works as saving button) are present. The area below those buttons can be scrolled vertically and
gives access to each of the external / internal units.