Safety Instructions; Standard - Divus TOUCHZONE TZ07 User Manual

SAFETY INSTRUCTIONS

The present operating instructions contain those safety instructions that are required to safely operate the
machine. All persons working with the machine must heed the present operating instructions, especially the
safety instructions.
In addition, all local stipulations governing the prevention of accidents must be heeded.
Only trained and authorized personnel may install and operate the machine.
Proper application: The machine has been designed for application inside the building automation and must
not be used to control security functions.
The machine has been built using state-of-the-art technology and all applicable safety regulations. However,
damage or negative effects to the machine or other material cannot be excluded if the machine is operated.
The machine meets the requirements of the EMC guidelines and of the harmonized European standards.
Modifications to the machine hardware may affect the system's EMC compatibility.
Without special protection measures, the machine must not be used in EX areas and in plants that require
special monitoring.
Danger of explosion. Do not expose the buffer batteries to heat. Serious injury may be the result.
The operating voltage of the machine must be within the specified range! The product label provides the
required information.

STANDARD

DIVUS TOUCHZONE meets the following guidelines and standards:
Low Voltage Directive 2006/95/CE (ex 73/23/CEE – 93/68/CEE)
Standard to which conformity is declared:
EN 60950-1: 2001-02
EMC Directive 2004/108/CE (ex 89/336/CEE – 92/31/CEE – 93/68/CEE)
Standard(s) to which conformity is declared:
Emissions:
EN 61000-6-3 :2002-10
EN 55022:1999 (+A1:2001)
Immunity:
EN 61000-6-1 :2002-10
EN 61000-4-2: 1996 (+A1:1998,+A2:2001)
EN 61000-4-4: 1996 (+A1:2001,+A2:2002)
EN 61000-4-5: 1997 (+A1:2001)
EN 61000-4-11: 1997(+A1:2001)
EN 61000-4-6: 1997(+A1:2001)
EN 61000-4-3: 1997(+A1:1999,+ A2:2001)
EN 61000-4-3: 1997(+A1:1999,+A1:2001)
The installation and wiring instructions contained in this documentation must be heeded. Conformity is
indicated by the attached CE label.
The EC conformity statements can be obtained from:
DIVUS GmbH
Pillhof 51
I-39057 Eppan (BZ)
Regarding DIRECTIVE 2002/96/EC waste electrical and electronic equipment hast to be
collected separately and is not allowed to dispose as unsorted municipal waste.
Safety
Conducted & Radiated Emissions
Electrostatic Discharges
Electrical Fast Transient / Burst
Surge
DIPS & Voltage Variations
Conducted RF
RF Electromagnetic Field
50 Hz Magnetic Field