Printing At The Intensity Set In The Printer - MIMAKI JFX500-2131 Operation Manual

Printing at the intensity set in the printer

1
Press the
2
Press the
3
Press
4
Press the
5
Press
6
Press the
7
Press
• To print at the intensity set in the printer, select [MANUAL].
8
Press the
9
Press
• Set values : Pattern 1 to 7, NOPRINT
• The following indicates the recommended printing mode for each
irradiation pattern.
Ink set
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Pattern 6
Pattern 7
NOPRINT
3-14
key in LOCAL.
key.
to select [UV MODE].
key.
to select [PATTERN].
key.
to select [MANUAL].
key.
to select [MANUAL].
4-colors
300x450HQ
Not normally used
When the crack of ink occurs.
600x600
600x900, 1200x1200
When contact with the media is poor
Not normally used
Only irradiation
F UNC T I ON
S E TUP
S E TUP
F E ED COMP .
S E TUP
UV MODE
UV MODE
: P A T T ERN
UV MODE
: P A T T ERN
UV MODE
: HOS T
UV MODE
: MNUA L
UV MODE
: P A T T ERN 1
UV MODE
: P A T T ERN 4
4-colors + white
300x450HQ (only color print)
Not normally used (Irradiation is weakened
directly after ink is applied.)
When the crack of ink occurs.
600x600 (only color print)
600x900, 1200x1200 (only color print)
When contact with the media is poor
300x450HQ, 600x600, 600x900, 1200x1200
(color white overlapping print, white print)
Only irradiation
[ EN T ]
[ EN T ]
[ EN T ]