Mxd-2001-Pan (Wall-Mount - Portrait/Landscape) - AMX Modero X-Series G5 Instruction Manual

MXT/D-2001-PAN - 20.3" X Series G5 Panels
PWR +
GND -
To the Touch Panel
FIG. 13 NetLinx power connector wiring diagram
1.
Insert the PWR and GND wires on the terminal end of the 2-pin 3.5 mm captive wire cable.
Match the wiring locations of the +/- on both the power supply and the terminal connector.
2.
Tighten the clamp to secure the two wires.
Do not tighten the screws excessively; doing so may strip the threads and damage the connector.
3.
Verify the connection of the 2-pin 3.5 mm captive wire to the external 12 VDC-compliant power supply and apply
power.

MXD-2001-PAN (Wall-Mount - Portrait/Landscape)

MXD-2001-PAN 20.3" Modero X Series
provide fast and smooth animations and transitions, as well as the Quad Core Processor. These panels feature a
panoramic capacitive multi-touch screen, and are hardware-ready for support of Near Field Communication™ (NFC)
Technology (see the NFC Support section on page 3 for more information).
The MXD-2001-PAN is available in Portrait and Landscape layouts:
Portrait
Landscape
Sleep
Button
NFC
Sensor
FIG. 14 MXD-2001-PAN-P/L (Portrait and Landscape)
12
®
G5 Panoramic Wall Mount Touch Panels feature the G5 Graphic Engine to
MXD-2001-PAN-P FG5968-36
MXD-2001-PAN-L FG5968-37
NFC Sensor
MXD-2001-PAN-P
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Power Supply
Sleep Button
MXD-2001-PAN-L