Toshiba 1600EP SERIES Instruction Manual page 3

The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, offi ce equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment
that requires extraordinarily high quality and/or reliability or where a malfunction or failure may cause loss
of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffi c signal instruments,
combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage
of Toshiba products listed in this document shall be made at the customer's own risk.
PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED
REPRESENTATIVE IN CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
The instructions contained in this manual are not intended to cover all of the details or variations in
equipment, or to provide for every possible contingency concerning installation, operation, or maintenance.
Should further information be required or if problems arise which are not covered suffi ciently, contact your
Toshiba sales offi ce.
The contents of this instruction manual shall not become a part of or modify any prior or existing
agreement, commitment, or relationship. The sales contract contains the entire obligation of Toshiba
International Corporation's UPS Division. The warranty contained in the contract between the parties
is the sole warranty of Toshiba International Corporation's UPS Division and any statements contained
herein DO NOT create new warranties or modify the existing warranty.
Any electrical or mechanical modifi cations to this equipment without prior written consent of Toshiba
International Corporation will void all warranties and may void the UL/CUL listing. Unauthorized
modifi cations can also result in personal injury, death, or destruction of the equipment.
Qualifi ed Personnel are those that have the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and has received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).
1600EP Series Instruction Manual
NOTICE
QUALIFIED PERSONNEL ONLY
3