Toshiba 1600EP SERIES Instruction Manual page 25

Capacity
Mechanical Design
Enclosure
Size (HxWxD)
Inches (max)
Paint System
Fan Panel
Battery System
Battery Replacement
Battery Packs
Battery Pack Size
Battery Pack Quantity
Battery Manufacturer
Battery Type
Toshiba's Part Number
for Battery Pack
(*) Input/output fi gures rated for 240 volts. Output ratings given for 0.85PF are only valid when the input voltage is
greater than 204 volts; otherwise, ratings given for 0.70PF are applicable.
(**) Battery backup time may vary depending on the operating conditions and ambient temperature at the installation site.
(***) An initial charge time of 24 hrs. is necessary to obtain proper battery performance level before unit is placed in
operation
(****) At 6600 ft (2000 m) above sea level, output capacity should be derated by 3%.
1600EP Series Instruction Manual
STANDARD MODELS: 10kVA; 14kVA; 18KVA; 22kVA (CONT'D)
10kVA (8.5kW)* 14kVA (11.9kW)*
Enclosure of unit made from sheet metal meeting NEMA1 and UL Type 1
28.25 x 13 x 33.5
Panel mounted on back of UPS to allow for
easy replacement of fans without turning UPS off.
Slide out battery packs accessible from front of UPS,
factory or authorized service center serviceable only
Designed for battery acid leakage containment with (6) batteries per pack.
5 x 7.3 x 18.2 (HxWxD) Inches (max)
4
18kVA (15.3kW)*
39.1 x 17.5 x 34.8
Powder coating.
8
Enersys
NPX-35
51896
22kVA (18.7kW)*
25