Toshiba 1600EP SERIES Instruction Manual page 42

Data Setting Screens (Cont'd)
The following screens show the setting procedure for setting the data variables. They are accessed from
the main 'Data Setting Screens' (see
BAUD RATE:1200
TO ACCEPT: SET
BAUD RATE:2400
TO ACCEPT: SET
BAUD RATE:4800
TO ACCEPT: SET
BAUD RATE:9600
TO ACCEPT: SET
Loops through four
possibilities
AUTO BAT TEST:NO
TO ACCEPT:SET
AUTO BAT TEST:YES
TO ACCEPT:SET
Loops through both
possibilities
INTERVAL: 1DAY
TO ACCEPT: SET
INTERVAL: 2DAY
TO ACCEPT: SET
INTERVAL: 99DAY
TO ACCEPT: SET
Loops through 99
possibilities
42
page 38) when the "SHIFT/SELECT" key is pressed:
Shift
Set
BAUD RATE:1200
+
TO CHANGE: SELECT
Monitor
Select
Shift
Set
BAUD RATE:2400
+
TO CHAGNE:SELECT
Monitor
Select
Shift
Set
BAUD RATE:4800
+
Monitor
TO CHANGE: SELECT
Select
Shift
Set
BAUD RATE:9600
+
TO CHANGE: SELECT
Monitor
Select
Returns to Data Settings
Screens (with new value
applied)
Shift
Set
AUTO BAT TEST:NO
+
TO CHANGE: SELECT
Monitor
Select
AUTO BAT TEST:YES
Shift
Set
+
TO CHANGE: SELECT
Monitor
Select
Shift
Set
+
TO CHANGE: SELECT
Monitor
Select
Shift
Set
+
TO CHAGNE:SELECT
Monitor
Select
Shift
Set
+
Monitor
TO CHANGE: SELECT
Select
Returns to Data Settings
Screens (with new value applied)
This parameter allows the correct
communication baud rate to be set.
Default is 9600
If set to YES, the unit will perform a
periodic battery test at the interval set in
the interval parameter on page 36.
Default is NO
Selects the interval (in days), at which
INTERVAL: 1DAY
the battery test will run (1 day through 99
days).
INTERVAL: 2DAY
INTERVAL: 99DAY
1600EP Series Instruction Manual