Table Of Contents; Index - Intek M-490 Plus Owner's Manual

Notes
- 40 -

Index

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Content of the packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Frequency bands table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Frequency band selection / programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Table of restrictions on the use of CB transceivers . . . . . . . . . . . . . . . . . . 14-15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PCB - Controls Board / ESP Compander Diagram . . . . . . . . . . . . . . . . . . . . . . 33
PCB - Main Board & CPU Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41
NOTICE !
It is recommended to carefully read this owner's manual before using the product. This
will also help the user to prevent using the radio in violation of the regulations valid in the
country where the product is used, as well as to avoid any possible interferences with
other services.
NOTICE !
Before using this transceiver, please check that the radio has been programmed on the
frequency bands, specifications and operating modes allowed by the regulations valid in
the country where the product is used. If not, please proceed to modify the frequency
band programming, as it is described in this owner's manual. This transceiver is factory
pre-programmed on the CE European frequency band (CEPT 40CH FM 4W).
0678
- 1 -
CH