General; Device Concept; Warning Notices On The Device - Fronius TransPocket 150 Operating Instructions Manual

General

Device concept

In conjunction with the digital resonance inverter, an electronic regulator adapts the power
source characteristic to suit the welding electrode during welding. The result is a light-
weight and compact device with excellent ignition and weld properties.
The power source also features a Power Factor Correction, which adapts the current con-
sumption of the power source to the sinusoidal mains voltage. This results in numerous ad-
vantages for the user, such as:
-
-
-
-
-
-
-
When using cellulose electrodes (CEL), a dedicated operating mode can be chosen for
perfect welding results.
Warning notices The warning notices and safety symbols on the power source must not be removed or
on the device painted over. They warn against incorrect operation which can lead to serious injury and
damage.
Meaning of safety symbols on the device:
Low primary current
Low conduction losses
Late tripping of the circuit breaker
Improved stability in the event of voltage fluctuations
Long mains leads can be used
In the case of multivoltage devices, a continuous input voltage range
180 A welding current is possible during single-phase operation - with the TransPock-
et 180
The power source has the following proper-
ties:
- Compact dimensions
- Robust plastic housing
- Good reliability even under harsh ope-
rating conditions
- Carrying strap for easy transport on
construction sites, etc.
- Safely protected controls
- Connection sockets with bayonet latch
17