Figure 9-6. Remove The Display Clamp; Figure 9-7. Remove Transparent Cover (1) - Motorola APX 3000 Detailed Service Manual

9-4
2. Remove the display clamp and then assemble the FSTN Display with Bezel (P/N:
72012008001) on the fixture. Once the FSTN Display with Bezel is on the fixture, screw back
the display clamp.
FSTN Display with Bezel
Display Clamp
3. Remove the transparent cover (1) and then assemble the Debugging Flex (P/N: 0104055J17)
on the fixture. Connect the flex with the mating connector on the FSTN Display. Once the flex
is connected to the FSTN Display, screw back the transparent cover (1).
Debugging Flex
Transparent cover (1)

Figure 9-6. Remove the Display Clamp

Figure 9-7. Remove transparent cover (1)

Debugging Fixture: Debugging Fixture Set up