Display Color Change On Channel - Motorola APX 8000HXE 1.5 User Manual

Table of Contents

Advertisement

You Hear
Tone Name
Gurgle
Dynamic Regrouping
Talk Permit
Unique,
New Message
Low-Pitch-
ed Chirp
Unique,
Priority Status
High-Pitch-
ed Chirp
Incremen-
Bluetooth Paired
tal- Pitched
Bluetooth Connected
Tone
Decremen-
Bluetooth Unpaired
tal- Pitched
Bluetooth Disconnect-
Tone
ed
A Group of
Man Down Continu-
Very High-
ous Tone
Pitched
Tones
Critical Man Down
Continuous Tone
Unique
Enhanced Zone Bank
Low-High
Up
Tone
Unique
Enhanced Zone Bank
High-Low
Down
Tone
4.6

Display Color Change On Channel

This feature provides visual channel identification for users to have a quick visual recognition on a
particular channel.
Your radio must be preprogrammed to allow you to use this feature.
When changing channels, the radio backlight on top display and accessories (DRSM or keypad Mic)
changes to the preprogrammed color.
When changing channels, the radio backlight on top display and accessories (DRSM) changes to the
preprogrammed color.
The radio backlight on top display changes to white and if connected to accessories, the DRSM
backlight changes to white and the keypad mic backlight changes to green for the following scenarios:
The backlight on top display changes to white and if connected to DRSM, the DRSM backlight changes
to white for the following scenarios:
When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels
Heard
(When PTT button is pressed) a dynamic ID has been
received.
(When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
When a new message is received.
When a priority message is received.
When Bluetooth accessory is paired with the radio.
When Bluetooth accessory is connected to the radio.
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the ra-
dio.
When radio is in Man Down mode and prepares to
transmit Emergency Alarm when the timer of this alarm
ends.
When radio is in Man Down Enhanced mode and pre-
pares to transmit Emergency Alarm when the timer of
this alarm ends.
When EZB Up button is pressed to scroll the Enhance
Zone Bank up.
When EZB Down button is pressed to scroll the En-
hance Zone Bank down.
MN006727A01-AA
Status Indicators
33

Advertisement

Table of Contents
loading

Table of Contents