Mitsubishi FUSO FE 2006 Owner's Manual page 214

FH5
FH3
FH2
FH1
BATT2
FH8
FH7
BATT1
Z12083
Z11262
Amperage
No.
(casing color)
FH1 60A (yellow)
FH2 60A (yellow)
FH3 40A (green)
FH5 60A (yellow)
FH7 40A (green)
FH8 40A (green)
BATT1 120A (white)
BATT2 120A (white)
WARNING
Replacement high-current
always be of the specified amperage. Using a
high-current fuse of incorrect amperage
could cause a fire.
CAUTION
•
Close the cover completely to prevent rain
water from entering the fuse box.
•
When installing the high-current fuse box
cover, be sure to retain it with the clamps
while pressing it straight downward. Push-
ing the cover toward the inside of the vehicle
with excessive force could break it.
5 Engine preheating circuit fuse
WARNING
Fuses carry electric current constantly. For
safety, disconnect the negative battery cable
before replacing any fuse.
If the indicator lamp does not come on in cold
weather, check whether the glow relay fuse
blown. If it has blown, disconnect the (–) cable from
the battery and replace the fuse with a new one
(127A).
WARNING
Be sure to use fuses of the specified amper-
ages.
A fire could result if a fuse of incorrect
amperage is used.
13-13
Protected circuit
Fuse box (S1, A1 – A5,
M1 – M12)
Fuse box
(B1 – B12)
Fuse box
(B13 – B16)
Hydraulic brakes
booster
ABS motor
ABS valve
Alternator
Alternator
fuses should
has