Mitsubishi FUSO FE 2006 Owner's Manual page 146

CAUTION
Engine oil with an API classification of CC can-
not be used. Be sure to use engine oil with a
classification of CD or higher.
Quantity required:
Oil pan
Oil filter
The engine oil level can be checked by using either
the oil level gauge or the oil level check button on
the instrument panel. The oil level check button is
for simple checking. Therefore, use of the oil level
gauge is recommended for precise checking.
NOTE:
Check the engine oil level with the vehicle parked
on a level place and the engine stopped. A correct
engine oil level cannot be determined when the
vehicle is tilted, or if the engine is running or the
time after stopping the engine is too short. Let the
engine stand at least 30 minutes after stopping it
before checking the oil level.
1.1 Checking by use of oil level check button
(simplified method)
1. Press the button before starting the engine. Esti-
mate the oil level from the color of the
that comes on.
Green: Oil level is correct.
Amber: Oil level is too low.
2. If the amber lamp comes on, replenish with the
recommended engine oil.
NOTE:
Provided the engine is not running, it is possible to
Z12036
check the oil level using the oil level check button
regardless of the position of the starter switch. If you
check the oil level with the starter switch in the "ON"
position and the oil level is too low, the
(amber) will come on and stay on. If the oil level is
normal, the
off and the
FE Approx. 9 liters (9.5 qts)
FG Approx. 10 liters (11 qts)
Approx. 1 liter (1.1 qts)
lamp (amber) will come on and go
lamp (green) will then come on.
12-19
lamp
lamp