Using Routes To Make Calls; Busy Display For Bundles And Routes On The System Telephone - Aastra 6771 User Manual

Telephoning

2.3.5 Using Routes to Make Calls

H Z
G R Z
The OpenCom 100 / Aastra 800 sets up calls to the desired subscribers either auto-
matically or via specific routes. Your system administrator configures these routes
in the OpenCom 100 / Aastra 800 and specifies how each route is seized. To man-
ually seize a specific route for a call, you dial the routing code before dialling the
(internal or external) call number. Making calls via specific routes enables you to
contact subscribers in the branches of a large company network, for example. You
can also use a manually-entered routing code to record your call-charge data for
private and business external calls separately.
The default route "External line" is always present and cannot be deleted. Auto-
matic line seizure uses the OpenCom 100 / Aastra 800 line seizure code digit for
the default route.
For information on the current routes and their codes, please contact your system
administrator.
2.3.6 Busy Display for Bundles and Routes on the
System Telephone
The system telephones can display whether all lines (trunks) of a bundle or a route
are busy.
To do this, you must programme a feature key (function key) for the system tele-
phone in the Configurator (in the Telephony: Devices: System phones menu,
function "Bundle state" or "Route state"). This function cannot be programmed on
the system telephone itself. Contact your system administrator if necessary so that
this feature key can be configured for you.
The name of the bundle or route and the number of busy channels appear in the
display. This display is constantly refreshed.
Enter the routing code and dial the call number.
For enquiry calls:
Enter the routing code and dial the call number.
Making External/Internal Calls
59