Remote-Programmable Call Forwarding - Aastra 6771 User Manual

Remote-Controlled Functions
Z
#
You can call the OpenCom 100 / Aastra 800 from an external telephone, from your
home for example, and then dial an external call number. The cost of the call is
then billed to the OpenCom 100 / Aastra 800 line. This way you can take
advantage of different tariff zones, for example.
For this feature, the system administrator must have set up a call number (for
remote control) in the OpenCom 100 / Aastra 800. In addition, the number
reserved in the OpenCom 100 / Aastra 800 can also be assigned an internal call
number via which the dialling is to be performed. In the case of remote-controlled
dialling, there is no check on authorisation.
Least Cost Routing (LCR) is used with remote dialling, provided the system admin-
istrator has correspondingly configured LCR and its application in the
OpenCom 100 / Aastra 800. Ask your administrator for the configuration appli-
cable to you.
5.2

Remote-Programmable Call Forwarding

Configuring the Function
Z
Z
*
Z
*
Z
Z
#
Enter the internal call number.
Press the hash key.
Enter the reserved call number.
Enter the system PIN.
Press the star key.
Enter your internal call number.
Press the star key.
Enter the trunk line seizure code, e. g.
Enter the destination call number.
Press the hash key.
Remote-Programmable Call Forwarding
0
.
99