Ip System Telephone Ports - Aastra 6771 User Manual

VoIP Telephones
3.1

IP System Telephone Ports

IP system telephones have additional ports not included with the standard system
telephones. Above the display on the back of the device there are two RJ45 jacks
for connecting the data line(s). These ports are labelled LAN and PC. Depending
on how your workstation is equipped technically, there are two options for con-
necting the IP system telephone. Your system administrator will connect the tele-
phone for you. If for whatever reason the lines get disconnected at some point,
follow the steps below to reconnect the telephone yourself.
Option 1: Your Workplace Computer has a Network Port Available.
Insert the network cable into the telephone's LAN port and the other end of the
cable into the available network port.
Option 2: Your Workplace Computer has just One Network Port Available
which is Used by Both Telephone and PC.
The telephone can be looped into the existing network connection via its LAN and
PC jacks. To connect the telephone, use a network cable to connect the telephone
to the PC, one end of which is inserted into the PC port of the telephone. A second
network cable is inserted into the LAN port of the telephone, the other end of
which goes into the network port.
The power supply of the telephone and the connected key extensions is provided
by the network feed ("Power over Ethernet"). If your company network does not
supply Power over Ethernet, the telephone will require a separate power supply
via an additional AC adapter plug (product code 4516000; in Britain operate only
the AC adapter with the part no. 4516001). The AC adapter plug is plugged into
the port on the base of the telephone. This symbol
are one or more key extensions connected to this telephone, the AC adapter plug
is not plugged into the port on the base of the telephone but into the outside key
extension (insert it into the port with the
entire device.
Please note:
If you have any questions on this topic, would like some more information or need
help with anything in this regard, please contact your system administrator.
88
Never operate an IP system telephone with PoE and
AC adapter plug simultaneously!
IP System Telephone Ports
identifies this port. If there
symbol) and provides power to the