Table of Contents
Advertisement
Chapter
11
Accessing the machine settings
Follow this procedure to change a setting:
1
Refer to the lists on the following pages to find the setting you want to change.
2
If there is a reference for the
setting A, refer to that page for
details. If not, at the top of the
list, note under which function
key B and menu C the setting is
located.
3
Press [Copy], [Scan], or [Photo
Card] depending under which
function key B the setting is
located.
4
Press [Menu] repeatedly until
the menu C under which the
setting is located is displayed.
5
2 ] or [3 3 3
2
Use [2 2
6
Press [OK].
7
Follow these guidelines to scroll through and register settings:
2 ] or [3 3 3
2
• Use [2 2
• To register a setting or access sub-settings, press [OK].
• If necessary, to return to standby mode, press [Stop/Reset].
NOTE
• < > in the LCD indicates the current setting.
Chapter 11
Machine settings
3 ] to select the setting you want.
3 ] to scroll through settings.
Example:
C
B
Menu: SPECIAL COPY
Function key: [Copy]
Name
Description
2 on 1
Copies two pages on one page (A4- or letter-size only). —
Copies without any borders (A4-, letter-, or 4" × 6"-size
BORDERLESS COPY
only).
IMAGE REPEAT
Prints multiple copies of an image on a single sheet.
AUTO
Automatically selects the number of repetitions.
MANUAL
Manually selects the number or repetitions.
VERTICAL
Selects the number of vertical repetitions.
HORIZONTAL
Selects the number of horizontal repetitions.
MIRROR IMAGE
Prints a mirror image of the original.
ENTIRE IMAGE
Prints the original image to fit the selected pint media
size.
A
Setting
Details
p. 6-5
—
p. 6-6
—
p. 6-7
—
1/2/3/4
1/2/3/4
—
p. 6-9
—
p. 6-10
Machine settings
11
11-1
Advertisement
Table of Contents
