Canon SmartBase MPC200 Photo Basic Manual page 10

• Do not place the following objects on top of the machine. If such objects come into contact
with internal electrical components, the machine may short-circuit resulting in fire or
electrical shock.
– Metallic objects such as jewellery and watches
– Containers of water or other liquids such as glasses, vases, or pot plants
If water etc. does spill inside the machine, turn off the power immediately, disconnect the
power cord and contact your local authorised Canon dealer or the Canon help line.
• Do not touch the high-voltage electrical parts as this may result in electrical shock.
• Do not place heavy objects on top of the machine as these may topple over and result in
injury.
• Do not insert your hands into the machine while it is printing as parts inside the machine are
moving and this may result in injury.
• After printing, do not touch the electrical contacts of the printhead. They will be hot and may
result in burns or electrical shock.
• Do not subject the machine to strong physical shock or
vibration.
• Before moving the machine, turn off the power and unplug
the machine.
• Do not lift the machine by any of its attachments. Close the
multi-purpose tray and paper output tray, and lift the
machine by the recessed areas on its sides as shown.
• A distinct change in performance may indicate a need for
servicing.
Maintenance
WARNING
• Do not service the machine yourself except as specifically described in this guide. If further
servicing is required, contact your local authorised Canon dealer or the Canon help line.
• Keep the machine clean. Dust accumulation may prevent the machine from operating properly.
X
Preface