Repeating An Image On A Page - Canon SmartBase MPC200 Photo Basic Manual

Hide thumbs Also See for SmartBase MPC200 Photo:
Table of Contents

Advertisement

8
Press [Start].
NOTE
• You can select the width cropped from the borders of the original image ( <EXTENSION AMOUNT>,
p. 11-3).

Repeating an image on a page

This feature allows you to copy an image several times onto a single page. You can set the
machine to automatically select the number of times it repeats the image (
specify the number (
Preparing your image to repeat it manually
To successfully repeat an image manually (with the <MANUAL> setting), do the following:
1
Set the print media size you will be copying on to (
2
Decide the number of times you want to copy the image. You can have a maximum
of four vertical repeats and four horizontal repeats.
3
Your original image must be no larger than one of the divisions. For example, if you
want to make four original-size repeats of your image, the original image must be no
larger than one quarter of the print media size you are copying on to.
Examples
2 × 2 repeats
Scanned area
NOTE
• The scanned area of a document also depends on the enlargement/reduction ratio.
You are now ready to start copying.
Chapter 6
below).
Document
p. 3-7).
3 × 3 repeats
Scanned area
Document
Copying
p. 6-8), or you can
6-7
6

Advertisement

Table of Contents
loading

Table of Contents