Table of Contents
Advertisement
Loading banner paper
NOTE
• Always leave an extra sheet at the end of the banner—just in case the type runs over.
• Printing on banner paper may require considerable amounts of ink so use new ink tanks if necessary.
• For best print results on banner paper, use light design patterns.
Follow this procedure to load banner paper in the multi-purpose tray:
1
Make sure the paper thickness lever is set to
the right.
• For details, see p. 3-6.
2
Lower the tray extension on the
multi-purpose tray.
3
Cut the banner paper to the required length
and place it behind the machine on a flat
surface. Then insert the first sheet in the
multi-purpose tray q and adjust the paper
guide A to the width of the sheet leaving a
! / 8
1 mm (
inch) gap between the paper guide
and edge of the sheet w.
• Make sure the sheets behind the machine are
aligned with the first sheet.
4
Set your computer to print on banner
paper.
• Allow the paper to flow over the edge of the table
as it exits the machine.
3-10
Print media handling
w
A
q
Chapter 3
Advertisement
Table of Contents
