Borderless Copying - Canon SmartBase MPC200 Photo Basic Manual

Borderless copying

This feature allows you to copy coloured images that fill the entire page without borders.
NOTE
• Use specialty papers with this feature (
• You can only use this feature when the print media size setting is set to <A4>, <LTR>, or <4"
details on setting the print media size, see p. 3-7. Note that with letter-size paper, a margin may still
appear.
• You can only use this feature when the print media type setting is set to <GLOSSY>, <H.RES.>, or
<PHOTO>. For details on setting the print media type, see p. 3-7.
• You can only copy in colour with this feature.
• Since the image is slightly enlarged to fill the entire page when copied, the image will be slightly cropped
at the edges.
• When borderless copying is selected, the LCD will display <100%+>.
Follow this procedure to make a borderless copy:
1
Load the document on the platen glass.
2
Press [Copy].
3
Use [2 2 2 ] or [3 3 3 2
4
Adjust any necessary settings for your document (
• The image quality is fixed to <COLOUR FINE>. You cannot change this setting.
• You cannot use the [Colour/B&W] key. Copying is fixed to colour copying.
5
Press [Menu] five times.
5 . S P E C I A L C O P Y
6
Use [2 2 2 2 ] or [3 3 3
7
Press [OK].
• If a print media size setting other than <A4>, <LTR>, or <4"
selected as the print media, the LCD will display the following message:
S I Z E :
T Y P E :
Use [2] or [3] to select either <A4>, <LTR> or <4"
Use [2] or [3] to select <PHOTO>, <GLOSSY>, or <H.RES.> as the print media type, then press
[OK].
6-6
Copying
p. 3-1).
3 ] to select the number of copies.
2 o n 1
3 ] to select <BORDERLESS COPY>.
< A 4 >
P H O T O
step 4, p. 6-1).
×
6"> is selected, or if <PLAIN> is
×
6">, then press [OK].
×
6">. For
Chapter 6