Specifications - Briggs & Stratton Candiana 1695890 Operator's Manual

Single stage snowthrower, 8.00 tp / 22 inch
Table of Contents

Advertisement

Available languages

Available languages

ENGINE:
Brand
Model Series
Gross Torque*
Type
Displacement
Starting System
Alternator
Oil Capacity
Engine Oil
Fuel Tank Volume
Spark Plug Gap and Torque
Resistor Spark Plug
Long Life Platnium Spark Plug
Ignition System
AUGER/IMPELLER:
Clearing Width
Intake Height
Auger/Impeller Diameter
Number of Impeller Blades
CHUTE:
Chute De ector
Chute Rotation
DRIVE SYSTEM:
Drive Type
Drive Speeds
Wheel Size
* Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automo-
tive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is a ected by,
among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of
products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (ac-
tual "on-site" or net power). This di erence is due to a variety of factors including, but not limited to, accessories
(air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity
limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
en
Model No.
1695886
Briggs & Stratton
Snow Series
8.00 T.P. @ 3060 rpm
4-Cycle
12.48 cu in. (205 cc)
Recoil, 230V Electric
None
18 - 20 oz (.54 - .59L)
Synthetic 5W30
3.0 qts (2.8 liters)
0.030 in. (0,76 mm) 180 lb-in (20 Nm)
491055
5066
This spark plug ignition system complies with Canadian standard ICES-002.
22 in. (55.9 cm)
12.6 in. (32.0) cm)
10.0 in. (25.4 cm)
2
Quick Chute (Quick De ector, if equipped)
Manual Rotation - 200° (Remote Rotation, if equipped)
Auger - Propelled
N/A
8.0 x 2.0 in. (20.3cm x 50.1cm)

Specifications

21

Advertisement

Table of Contents
loading

Table of Contents