Table of Contents
Advertisement
16
1.
SETUP
Press until desired feature
is heard (see list at right).
or
2.
SKIP
REPEAT
Press until desired selection
is heard.
3.
SETUP
Press to set selection and
move to next menu option.
- OR -
(
/Stop)
Play
Press to set selection and
exit menu.
Answering System Operation
Changing feature options
Menu features can be changed to program how the
answering system operates. Press
hear each feature. When you hear the feature you want
to modify press
SKIP
setting.
Feature options
System announces:
"Number of rings", current set-
ting, then "To change the set-
ting press SKIP or REPEAT; to
continue setup, press SETUP"
Options: 2 / 4 / 6 /Toll Saver
"Call screening", current set-
ting, then "To change the set-
ting press SKIP or REPEAT; to
continue setup, press SETUP"
Options: On / Off
"Remote access code", cur-
rent setting, then "To change
the setting press SKIP or
REPEAT; to continue setup,
press SETUP"
Options: (enter 2-digit code) 19
"Message alert tone", cur-
rent setting, then "To change
the setting press SKIP or
REPEAT; to continue setup,
press SETUP"
Options: On / Off
NOTE: Press and hold
decrease the remote access code number by 10.
39
39
repeatedly to
SETUP
or
to change the
REPEAT
(Default settings underlined).
Feature description:
Choose number of rings before the
system answers a call. When Toll Saver
is active, the system answers after two
rings if you have new messages, and
after four rings if you have no new mes-
sages. When retrieving messages from a
long-distant call, you may disconnect your
call after three rings so that long distance
charges will not be charged.
When on, you can hear callers leave mes-
sages, or answer the call.
Enter a two-digit number (10-99) for
remote access from another telephone
(see page 43).
When on, the telephone beeps every 10
seconds when there are new messages.
or
REPEAT to increase or
SKIP
Hide quick links:
Advertisement
Table of Contents
