Changing Feature Options - AT&T E5640 User Manual

91-000353-050-000_E5640 CIB_R2.qxd
1.
MENU
Press until desired feature
is heard (see list at right).
2.
CHANGE
Press until desired selection
is heard.
3.
MENU
Press to set selection and
move to next menu option.
Or
(Play/Stop)
Press to set selection and
exit menu.
10/26/2005 12:04 PM
Answering System Operation

Changing feature options

Menu features can be changed to customize how the
answering system operates. Press
hear each feature. Press
feature you want to modify.
Feature options
System announces:
"Change announcement"
Options: [record announcement]
"Change remote access code"
Options: [enter 2-digit code] 19
"Change message alert"
Options: On / Off
"Change announce only"
Options: On / Off
"Change base ringer"
Options: On / Off
"Change number of rings"
Options: 2 / 4 / 6 /Toll Saver
NOTE: Press and hold CHANGE to advance the remote access
code number by 10.
31
Page 31
repeatedly to
MENU
when you hear the
CHANGE
(Default settings underlined).
Feature description:
Press REC/MEMO to record you out-
going announcement (see page 29).
Press STOP to stop recording.
Enter a two-digit number (10-99) for remote
access from another phone (see page 35).
When on, the telephone beeps every 10
seconds when you have new messages.
When on, callers hear an announcement
but cannot leave messages (see page 30).
Choose this option to turn the base ringer
on or off (does not affect handset).
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.