Table of Contents
Advertisement
Getting Started
Battery installation & charging
After battery installation, place the cordless handset in the charger and allow to charge
for at least 16 hours before use. You can keep the battery charged by returning the cord-
less handset to the charger after each use. When the battery is fully depleted, a recharge
takes about 12 hours. The average talk time on a fully charged battery is about five hours
depending on environmental conditions, and the standby time is approximately five days.
Press in and downward on
the tab to open the battery
compartment cover.
Plug power adapter into jack on
underside of charger as shown,
then plug into an electrical outlet
not controlled by a wall switch.
Caution: Use only the supplied rechargeable battery pack or AT&T replacement battery model 3301 (SKU 91076.
Part number 80-5071-00-00).
NOTE: If you need a battery pack replacement, call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268.
Plug the battery
pack connector into
handset.
Place handset in charger for at
least 16 hours before first use.
7
7
Place the battery
pack and wires in the
compartment.
LOW BATTERY
0
8/12 10:06
then
NEEDS RECHARGING
0
8/12 10:06
Low battery indicator
Return handset to charger when this
symbol appears.
Slide battery com-
partment cover up
until it clicks closed.
AM
AM
Hide quick links:
Advertisement
Table of Contents
