AT&T E5908 User Manual page 16

RINGER: 1
Telephone Operation
Handset settings
Set handset ringer tone
This feature allows you to choose one of 4 ringing
tones, (1-4) or turn the ringer off ( 0 ). Use the
or button to hear an example of each ringer tone,
^
DIR
then press to select the one you prefer.
SELECT
• Press
MENU/
CHAN
• Press ^ twice. The screen displays RINGER: and
DIR
setting.
• Press to change current setting.
SELECT
• Press V or ^
CID
will hear a sample of each ringer tone.
• Press to select the displayed ringer tone and
SELECT
exit.
Set handset ringer volume
• Press and hold
CID
• When the screen displays OFF LOW HIGH, the
current setting will flash.
• Press or
V ^
CID
• Press ,
SELECT
to confirm and save your selection, and
MENU/
CHAN
exit to idle mode.
NOTE: Handset ringer volume can also be temporarily adjusted by
V ^
pressing or
CID DIR
to temporarily mute ringing during incoming ringing.
OFF/
CLEAR
The next call will ring normally.
12 12
to begin programming.
to display 1, 2, 3, 4, or OFF. You
DIR
or for about 2 seconds.
V ^
DIR
to select your preference.
DIR
,
PHONE/ OFF/
FLASH
(OFF LOW HIGH) or pressing
V
CID
, or
CLEAR