Options While On Calls - AT&T E5908 User Manual

V^
Volume
Flash
Tone
Hold
Channel
Flash
Tone
Telephone Operation

Options while on calls

To adjust volume
Press
V
CID
button on the telephone base to adjust
VOLUME
listening volume.
Call waiting
If you subscribe to a Call Waiting service with your
local telephone service provider, you will hear a beep if
someone calls while you are already on a call. Press
/FLASH
PHONE
the base to put your current call on hold and take the
new call. You can press
handset or
FLASH
and forth between calls.
Hold
Press to place a call on hold.
HOLD
Volume
When a call is on hold, resume the conversation on the
Mute
cordless handset by pressing
Resume a conversation at the telephone base by lifting
the handset or pressing
Speaker
telephone base.
When a call is on hold, you can replace either handset
in the telephone base or charger, and retrieve the call
from another telephone.
Mute
While using the telephone base, you can press
silence the microphone during a conversation. You will
be able to hear the caller, but your caller will not be
able to hear you until you press
speaking.
17 17
or buttons on the handset or the
^
DIR
on the cordless handset or
/FLASH
PHONE
on the base anytime to switch back
HOLD
SPEAKER
MUTE
on
FLASH
on the cordless
or .
PHONE/
FLASH
or on the
HOLD
to
MUTE
again to resume