Base Settings - AT&T E5908 User Manual

LANGUAGE
DIAL MODE: TONE
NOTE: This sets the dial mode
for both the handset(s) and the tele-
phone base.
NOTE: During a power failure,
only the corded handset can be used
to make and answer calls. The dial
mode will default to pulse dial. To
change to tone dial temporarily, press
* on the telephone base (see page
17). When the power is restored, the
dial mode will return to the pro-
grammed setting.
Telephone Operation

Base settings

You can change settings to program how the telephone
base works.
Follow the steps below to program the telephone base.
To stop at any time, press
gramming stops automatically so you can answer the call.
Choose telephone base language
At this menu you can select the language used in all
menus and screen displays.
• Press to begin programming.
MENU
• Press V or
CID DIR
LANGUAGE .
• Press to change current setting.
SELECT
• Press or
V ^
CID DIR
options of ENGLISH, ESPANOL and FRANCAIS.
• Press to select the displayed language and
SELECT
exit.
Choose dial mode
At this menu you can choose tone or pulse dialing. The
factory default setting is TONE. Change this to PULSE
only if you do not have touch-tone dialing service.
• Press to begin programming.
MENU
• Press V or
CID DIR
MODE & setting.
• Press to change current setting.
SELECT
• Press V or
CID DIR
• Press to select displayed dial mode and exit.
SELECT
13 13
. If the phone rings, pro-
CLEAR
^ until screen displays
to scroll through the available
^ until screen displays DIAL
^ to display TONE or PULSE.