Alert Tones; Indicator Lights - AT&T E5908 User Manual

Appendix
Display screen messages, lights and tones

Indicator lights

NEW CALL
If you have Caller ID service: On
when new calls have been received;
off when all new Caller ID records
at the telephone base have been
reviewed (see page 29).
IN USE
Steady: Line is in use.
Flashing: Call is on hold.
(Also flashes in cadence
with ringing to announce
an incoming call.)
ANSWER ON
On: Answering system is on.
Off: Answering system is off.

Alert tones

"Beep-Beep...Beep-Beep..."
(Double beep every 5 seconds)
"Beep-Beep-Beep-Beep-Beep"
(5 quick beeps)
"Beeeeeeeeep"
(1 long beep)
"Beep"
(One beep every 10 seconds)
"Siren"
(Alternating tones)
45 45
Handset battery is low. Place handset in
charger to charge the battery.
Error tone (current operation has been
unsuccessful; try again).
Confirmation tone (current operation has
been successfully completed).
Message Alert at the telephone base
(there are new messages).
Handset is being paged.
SPEAKER
On when speakerphone
is activated.
CHARGE
On when handset is
charging in cradle.