To Copy, Edit Or Delete An Entry - AT&T E5908 User Manual

1
^DIR
DIRECTORY
2 ^
DIR
ADAM
5551234
3
SELECT
SPEED EDIT ERASE
5551234
^
DIR
SPEED EDIT ERASE
5551234
^
DIR
SPEED EDIT ERASE
5551234
Press SELECT to
choose blinking option
on the handset.
NOTE: Screens shown
above are displayed on the cord-
less handset. The telephone base
display is slightly different, but the
procedure is the same.
NOTE: See Page 27 for
instructions on dialing a directory
entry from the base.
Directories

To copy, edit or delete an entry

You can make existing directory entries Speed Dial entries
if they are stored in the handset. You can also change
names, numbers and the distinctive ringing settings, or erase
entries, that are stored in the cordless handset or the tele-
phone base. When any entry is displayed, press
to see the options. Press
option you want (blinking text), then press
To make an entry a Speed Dial entry (cordless
handset only)
When SPEED is blinking, press
memory location (1-9) to make this entry a Speed Dial
entry.
If you choose a memory location that is already
assigned to a different entry in the directory, that entry
will remain in the directory, but will not have a SPEED
DIAL location.
To edit an entry
Press V or ^
CID DIR
. You can change the name and number (or dis-
SELECT
tinct ring
setting on the cordless handset) by following the steps
described on pages 25-26.
To delete an entry
Press V or ^
CID DIR
to display a confirmation screen ( ERASE NO
SELECT
YES ).
To delete the entry, press
press .
SELECT
To abort the procedure and leave the entry intact, press
to highlight NO, then press
V
CID CID
28 28
V or ^ to highlight the
CID DIR
, then dial a
SELECT
until EDIT is blinking, then press
until ERASE is blinking, then press
to highlight YES , then
^
DIR
SELECT
SELECT
.
SELECT
.