Table of Contents
Advertisement
91-000832_E5644B CIB_R4.qxd
1.
MENU
Press until desired feature
is heard (see list at right).
2.
CHANGE
Press until desired selection
is heard.
3.
MENU
Press to set selection and
move to next menu option.
Or
(Play/Stop)
Press to set selection and
exit menu.
NOTE: To temporarily dis-
able the message alert tone,
press any key on the answering
system except ANSWER ON/OFF.
This turns off the audio message
alert tone but the number in the
message window will continue to
flash as a reminder that there are
unreviewed messages on the
answering system. The message
alert tone will be re-activated with
the next incoming message.
NOTE: To switch off the
message alert tone for all incoming
messages, read the section on dis-
abling the message alert function in
this user's manual.
2/13/1950
7:21 PM
Answering System Operation
Changing feature options
Menu features can be changed to program how the
answering system operates. Press
hear each feature. Press
feature you want to modify.
Feature options
System announces:
"Announcement. Press PLAY or
press RECORD. To continue setup,
press MENU."
Options: [record announcement]
"Remote access code. To change
the setting press CHANGE."
Options: [enter 2-digit code] 19
"Message alert. To change the set-
ting press CHANGE."
Options: On / Off
"Announcement only, record no
messages. To change the setting
press CHANGE."
Options: On / Off
"Base ringer. To change the set-
ting press CHANGE"
Options: On / Off
"Number of rings. To change the
setting press CHANGE."
Options: 2 / 4 / 6 /Toll Saver
NOTE: Press and hold CHANGE to advance the remote access
code number by 10.
30
Page 30
repeatedly to
MENU
when you hear the
CHANGE
(Default settings underlined).
Feature description:
Press REC/MEMO to record you out-
going announcement (see page 28).
Press PLAY/STOP to stop recording.
Enter a two-digit number (10-99) for remote
access from another phone (see page 34).
When the Answering System is turned on
(and the ANSWER ON light is on) and the
Message Alert function is activated, any
new incoming message will increase the
flashing number in the message window
by one, and a beep tone will sound every
ten seconds as a reminder that there are
unreviewed messages on the answering
system.
When on, callers hear an announcement
but cannot leave messages (see page 29).
When base ringer is turned on, the tele-
phone base will ring during incoming call
such that the user can identify whether
there is another incoming call.
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.
Advertisement
Table of Contents
